Abstract:Active nitrogen species are widely acknowledged as pollutants that are both harmful to the environment as well as human health. Emissions from wastewater and agricultural applications contain nitrogen in many forms, but in soils and waterways nitrate (NO 3 - ) predominates due to the presence of nitrifying bacteria. In comparison to more reduced forms of nitrogen such as total ammonia (NH 3 /NH 4 + ), nitrate is not only a less versatile species from a chemical manufacturing and energy standpoint; it is also more difficult to selectively separate from wastewater streams. For instance, we have conducted considerable work on electrochemical ammonia stripping, achieving high selectivities and even enabling concentration of ammonia in the form of strong ammonium salt solutions. 1 Moreover, it is estimated that recovery of active nitrogen species from municipal and agricultural wastewaters could offset the need for ~30% of Haber-Bosch ammonia synthesis. From this perspective, it is desirable to develop catalysts that are active and selective for the conversion of nitrate to ammonia. Titanium metal has been demonstrated as a relatively active and selective catalyst for nitrate reduction to ammonia in acid; 2 however, similarly active and selective catalysts under neutral-to-alkaline conditions are a subject of active research. 3–6 Here we report on the performance of atomically dispersed titanium sites on carbon nanoflowers 7 for the reduction of nitrate to ammonia under alkaline conditions. The dispersity of these catalysts was supported by XAS (little/negligible Ti-Ti scattering, putative Ti-N and Ti-N-C scattering), STEM (visual confirmation of atoms), and XRD (no crystalline Ti phases observed). We contrast the performance of these atomically dispersed catalysts with that of bulk titanium foil, which shows comparably low activity and selectivity for nitrate reduction at similar pHs and potentials. In addition, we compare the atomically dispersed titanium catalysts with titanium nanoparticles, as a first-order check for catalyst aggregation under reductive reaction conditions. Moreover, the performances of all of these catalysts are compared with the baseline/controls of bare carbon paper, as well as carbon nanoflowers supported on carbon paper without titanium dopant. Additional control experiments include tests conducted in the absence of nitrate. These lines of evidence, together with the relatively high rate of ammonia production (>0.01 mmol / cm geo 2 / h, >10 mmol / mg Ti / h), support the notion that atomically dispersed titanium is uniquely active and selective for NO 3 RR under alkaline conditions. Further, for the above catalysts at pH ~13, we show the impacts of potential on the product distribution, including nitrogen mass balance and Faradaic efficiency. As a best practice, we demonstrate consistent closure of both metrics. Potential was varied between -0.4 V and -0.85 V vs. RHE. Partial current toward NO 3 RR increases with increasing overpotential, as another sanity check supporting the findings. Notably, in addition to observing ammonia and nitrite as products of NO 3 RR, we also checked for other stable intermediates (in addition to N 2 ) along the 8-electron reaction pathway – and as a result, we are able to report small amounts (FE ~5-10%) of hydroxylamine (NH 2 OH) product. In the specific case of atomically dispersed titanium on carbon nanoflowers, we also report on certain observed electrolyte effects, such as the incorporation of perchlorate vs. sulfate as a supporting electrolyte. We demonstrate the role of supporting salt both in modifying selectivity – e.g. sulfate suppressing HER, possibly via site-blocking – as well as in altering the carbon support itself. These observations contribute to a growing body of work that will enable the engineering of these catalysts for high-rate reduction of nitrate to ammonia, aiding both wastewater remediation and the decarbonization of ammonia synthesis. References: (1) Liu, M. J., et al. Water Res. 2020 , 169 , 115226. https://doi.org/10.1016/j.watres.2019.115226. (2) McEnaney, J. M., et al. ACS Sustain. Chem. Eng. 2020 , 8 (7), 2672–2681. https://doi.org/10.1021/acssuschemeng.9b05983. (3) Wu, Z.-Y., et al. Nat. Commun. 2021 , 12 (1), 2870. https://doi.org/10.1038/s41467-021-23115-x. (4) Liu, H., et al. Angew. Chem. Int. Ed. 2022 , 61 (23). https://doi.org/10.1002/anie.202202556. (5) Chen, F.-Y., et al. Nat. Nanotechnol. 2022 , 17 (7), 759–767. https://doi.org/10.1038/s41565-022-01121-4. (6) Murphy, E., et al. ACS Catal. 2022 , 12 (11), 6651–6662. https://doi.org/10.1021/acscatal.2c01367. (7) Chen, S., et al. J. Am. Chem. Soc. 2018 , 140 (32), 10297–10304. https://doi.org/10.1021/jacs.8b05825.

Photochemical Acceleration of Ammonia Production by Pt1-Ptn-TiN Reduction and N2 Activation.

Modulating Electronic Metal‐Support Interactions to Boost Visible‐Light‐Driven Hydrolysis of Ammonia Borane: Nickel‐Platinum Nanoparticles Supported on Phosphorus‐Doped Titania

Au Sub-Nanoclusters on TiO 2 toward Highly Efficient and Selective Electrocatalyst for N 2 Conversion to NH 3 at Ambient Conditions.

First principles study of single Fe atom supported on TiO<sub>2</sub>(001) for nitrogen reduction to ammonia

Recent Advances in TiO2‐based Catalysts for N2 Reduction Reaction

Porous TiWO3/SrWO4 with High Titanium Molar Ratio for Efficient Photoelectrocatalytic Nitrogen Reduction under Mild Conditions

Photocatalytic transfer of aqueous nitrogen into ammonia using nickel-titanium-layered double hydroxide

Theoretical Insights into Nitrate Reduction to Ammonia over Pt/TiO 2 : Reaction Mechanism, Activity Regulation, and Catalyst Design

Enhanced Nitrogen Reduction to Ammonia by Surface- and Defect-Engineered Co-catalyst-Modified Perovskite Catalysts under Ambient Conditions and Their Charge Carrier Dynamics

Theoretical Insights into Nitrate Reduction to Ammonia over Pt/TiO2: Reaction Mechanism, Activity Regulation, and Catalyst Design

Enhanced Electrocatalytic Performance of TiO2 Nanoparticles by Pd Doping Toward Ammonia Synthesis under Ambient Conditions

Engineering of local electron properties optimization in single-atom catalysts enabling sustainable photocatalytic conversion of N2 into NH3

Regulating bimetallic active centers for exploring the structure-activity relationship toward high-performance photocatalytic nitrogen reduction

Ti2O3 Nanoparticles with Ti3+ Sites Toward Efficient NH3 Electrosynthesis under Ambient Conditions

Recent progress on Ti-based catalysts in the electrochemical synthesis of ammonia

Electrocatalytic Nitrate Reduction to Ammonia at Atomically Dispersed Titanium Sites on Carbon Nanoflowers

Ti 2+ Site-Promoted N≡N Bond Activation in LaTiO 3– x Nanosheets for Nitrogen Photofixation

Relating Near-Surface Ti Electrode Structure with Electrochemical Nitrate Reduction Performance Via Synchrotron X-Ray Characterization

Asymmetric iron–titanium pairs within ultrathin TiO2 nanosheet enable high-efficiency nitrate reduction to ammonia

Enhancing the Supply of Activated Hydrogen to Promote Photocatalytic Nitrogen Fixation

Recent advances in TiO<sub>2</sub>-based catalysts for N<sub>2</sub> reduction reaction