Abstract:Cellular Polymers, Ahead of Print. The crystallization behavior during foaming directly affects the foaming properties. For crystalline polymers, there is no consensus on the influence of the crystallization behavior during foaming process on the stabilization of the cell structure. In this work, PBAT foamed bead and unfoamed pellets were prepared by controlling the saturated temperatures in supercritical CO2, soaking step (one or two) and the depressurization rate, respectively. Double melting peaks were observed in the DSC curve of supercritical CO2 foamed PBAT beads. By comparing the outgassing rates we find that the stretching-induced crystallization caused by the rapid expansion of the gas during foaming plays an important role in the stabilization of the cells. Although the crystalline perfection or crystal size at this time is much smaller than that of the crystalline grains formed during static cooling, the rapid crystallization is effective in stabilizing the cell structure of the foamed pores. Compared to normal supercritical foaming processes, the two-step foaming process of soaking CO2 at high temperatures followed by foaming at low temperatures results in an increase in cell size and expansion ratio. At high temperatures, more CO2 diffuses into the PBAT pellets, increasing the instantaneous gas concentration in the pellets for foaming, and the rapid stretching produces stretching-induced crystallization that raises the average size of the cells, further increasing the expansion multiplicity of individual cells. The average cell size of foam beads rises from 37.8 to 48.8 μm and the expansion ratio also increases to 8.6 with saturated temperature increasing form 95 to 105°C. The two-step soaking foaming method is a more efficient way of manufacturing industrial foamed beads, allowing for the preparation of better foam beads at low temperatures.

Controllable cell structures of poly(ether-block-amide) foams via isothermal melt crystallization-foaming in supercritical CO2

Cell Structure Variation of Long-Chain Branched Polyether Block Amide Regulated by Crystallization Behavior

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Influence of foaming-induced crystallization behavior on the structure of poly(butylene adipate-co-terephthalate) supercritical foamed beads

Utilization of supercritical CO2 for controlling the crystal phase transition and cell morphology of isotactic polybutene-1 foams

Cell structure-tunable PEFT copolyester foams prepared via conducting a prior cold crystallization

Effect of Crystalline Transformation on Supercritical CO2 Foaming and Cell Morphology of Isotactic Polybutene-1

Super‐Elastic and Dimensionally Stable Polyether Block Amide Foams Fabricated by Microcellular Foaming with CO2&N2 as Co‐Blowing Agents

Structure-tunable polyether block amide/polylactic acid foams with shape memory performance using supercritical CO 2 foaming

Structure-tunable Polyether Block Amide/polylactic Acid Foams with Shape Memory Performance Using Supercritical CO2 Foaming

Effect of crystalline transformation on supercritical CO 2 foaming and cell morphology of isotactic polybutene-1

Influence of Microphase Morphology and Long-Range Ordering on Foaming Behavior of Pe-B-Peo Diblock Copolymers

Effects of Crystal Structure on the Foaming of Isotactic Polypropylene Using Supercritical Carbon Dioxide As a Foaming Agent

Controlling Sandwich‐structure of PET Microcellular Foams Using Coupling of CO2 Diffusion and Induced Crystallization

Microstructure development of PEBA and its impact on autoclave foaming behavior and inter-bead bonding of EPEBA beads

Flexibly Controlling the Polycrystallinity and Improving the Foaming Behavior of Polylactic Acid via Three Strategies

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

Supercritical carbon dioxide induced foaming of highly oriented isotactic polypropylene

Formation Mechanism and Tuning for Bimodal Open-Celled Structure of Cellulose Acetate Foams Prepared by Supercritical CO2 Foaming and Poly(ethylene Glycol) Leaching

Rheological Control in Foaming Polymeric Materials: II. Semi-crystalline Polymers

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents