Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Multiscale Modeling of Cutting Processes for TiBw/TA15 Composites Based on the Interface Model Parameters Identification Method by Microcolumn Compression

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Microstructural based constitutive modeling and subsurface microhardness prediction in machining of network-structured TiBw/TA15 composites

Cutting modeling using cohesive zone concept of titanium/CFRP composite stacks

On understanding the chip formation mechanism of TiBw/TA15 composites with network architecture in micro cutting

Orthogonal Cutting Modeling of Hybrid Cfrp/Ti Toward Specific Cutting Energy and Induced Damage Analyses

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Cutting Modeling of Hybrid CFRP/Ti Composite with Induced Damage Analysis

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions

Effects of cutting conditions on the surface formation mechanism in cutting of in-situ (TiBw+TiCP)/Ti composite

Simulation and Experimental Analysis of Surface Defects in Turning of TiCp/TC4 Composites

Modeling of effects of thermomechanical processing on elevated-temperature mechanical properties of in situ (TiB + TiC)/Ti-1100 composite

Numerical Modeling and FE Analysis of CFRP/Ti Stack Orthogonal Cutting

Finite Element Analysis when Orthogonal Cutting of Hybrid Composite CFRP/Ti

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite

Towards an Advanced Modeling of Hybrid Composite Cutting: Heat Discontinuity at Interface Region

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites