Abstract:Irreversible phase transition and surface residual lithium, which cause the fast capacity fading of LiNi0.8Co0.1Mn0.1O2 (NCM811), are the main obstacles that hinder their commercial application. Herein, to modify the surface/interphase properties of NCM811, we elaborately propose a hybrid Li3PO4-AlPO4-Al(PO3)(3) coating layer that combines the advantages of ionic conductor (Li3PO4) and thermal stable compound (AlPO4) via reacting aluminum metaphosphate (Al (PO3)(3)) precursor with the surface residual lithium (Li2CO3 or/and LiOH) during the coating process. When used as cathode for lithium-ion battery, the optimized NCM811 delivers a high initial discharge capacity of 201.8 mAh g(-1) and 218.9 mAh g(-1) at 0.1C under the temperature of 30 degrees C and 50 degrees C, with capacity retention of 85.4% and 78.89% after 50 cycles, respectively, which are much higher than that of uncoated sample (73.93% and 57.98%). Moreover, when it is coupled with graphite anode to form a lithium-ion full cell, it delivers an impressively high energy density of 467.5 Wh kg(-1) (based on mass of positive and negative material), and retains 71.8% of its initial energy density after 100 cycles. The significantly enhanced electrochemical properties should be attributed to the multifunctional hybrid nano-coating layer that could efficiently reduce the surface residual lithium, suppress the irreversible phase transition, and prevent the active materials from the erosion of HF as verified by the ex-situ X-ray diffractometry, Raman spectroscopy and transmission electron microscopy. This work provides new insights into the surface/interphase design strategies to improve the structural stability of Ni-rich cathode, which will promote the development of high capacity cathode materials.

A Stable Dual LiAlO2/Li2SiO3 Coating LiNi0.8Co0.1Mn0.1O2 Cathode Towards Ultra-Long-life and Wide-Temperature Lithium-Ion Battery

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Al2O3 coated single-crystalline hexagonal nanosheets of LiNi0.6Co0.2Mn0.2O2 cathode materials for the high-performance lithium-ion batteries

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Boosting cycle stability of NCM811 cathode material via 2D Mg-Al-LDO nanosheet coating for lithium-ion battery

Enhanced cyclic stability and discharge capacity of NCM811 cathode by coating ferroelectric-type LiNbO 3 ionically conductive layer

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery