Abstract:Carbon fiber reinforced polymer (CFRP) composites have widely been used in the aerospace field owing to their excellent mechanical properties. However, composite structures often fail under complex space environmental conditions. In particular, the fiber bridging and cryogenic temperature may greatly change the fracture toughness of CFRP composites. Herein, the effects of cryogenic temperature and fiber bridging on the fracture toughness of unidirectional composite laminates were experimentally examined by double cantilever beam (DCB) testing at different temperatures (room temperature, -50 degrees C, -70 degrees C, -100 degrees C, -150 degrees C, and -180 degrees C). Different calculation methods of fracture toughness were used and the results were compared. A method without measuring the delamination length at low temperatures was used and the results were consistent with other methods. The average difference in fracture toughness values was less than 5 %. The fiber-bridging microstructures of composites under cryogenic temperatures were examined by confocal microscopy along with the geometric morphology and parameters of surface roughness. The results suggested changes in the matrix failure mechanism at -50 degrees C, resulting in maximum fracture toughness, which is 26.45 % higher than that at room temperature. A semi-analytic approach was then proposed to express the bridge stress, and a bilinear cohesive zone model was established to simulate the delamination of composite laminates at low temperatures. Overall, the numerical data agreed well with the experimental results (peak force maximum error of 17 %), suggesting the usefulness of the proposed method for the prediction of interlamination properties and structural damage design of composite structures at cryogenic temperature.

On Temperature-Dependent Fiber Bridging in Mode I Delamination of Unidirectional Composite Laminates

Temperature Effects on Transverse Failure Modes of Carbon Fiber/bismaleimides Composites

Temperature‐dependent Interlaminar Behavior of Unidirectional Composite Laminates: Property Determination and Mechanism Analysis

Temperature Effects on the Mode II Delamination Propagation Behavior of Aerospace-Grade CFRP Multidirectional Laminates

Temperature effect on the static mode I delamination behavior of aerospace‐grade composite laminates: Experimental and numerical study

Evaluating the loading rate dependency of mode I delamination for composite laminates at different temperatures

A multi-linear constitutive relation considering the temperature effect on quasi-static mode I delamination in UD/MD laminates

Temperature-dependent R-curve and Traction-Separation Relation in Mode-I Fracture of GFRP Laminates

Bridging effect on mode I fatigue delamination behavior in composite laminates

An Experimental and Numerical Study of the Influence of Temperature on Mode II Fracture of a T800/Epoxy Unidirectional Laminate

Mode I Fracture Toughness with Fiber Bridging of Unidirectional Composite Laminates under Cryogenic Temperature

Experimental Investigation and Modeling of Dynamic Thermomechanical Behavior of 4-Harness Satin Weave Carbon/epoxy Composites

Investigation of the Mode-I Delamination Behavior of Double-Double Laminate Carbon Fiber Reinforced Composite

Tensile mechanical behavior and failure mechanisms of fiber metal laminates under various temperature environments

Effect of temperature on bending properties and failure mechanism of three-dimensional braided composite

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

An Efficient Semi-Analytical Method to Study the Mode I Bridging-Traction Law of Composite Laminates

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

Modeling the Effects of Interfacial Properties on the Temperature Dependent Tensile Strength of Fiber Reinforced Polymer Composites

Effect of temperature on bending properties and failure mechanism of three-dimensional multiaxial warp-knitted carbon/epoxy composites

Investigation of Temperature Effect on Thermo-Mechanical Property of Carbon Fiber/peek Composites