Abstract:Nowadays, extreme environmental conditions are one of the main factors causing the deterioration of monuments built with limestone. Therefore, this study proposed the evaluation of the consolidating effect of calcium zinc hydroxide dihydrate nanoparticles, with the molecular formula CaZn 2 (OH) 6 ·2H 2 O (CZ), applied on Calcehtok limestone. The consolidating effect of nanoparticles was characterized through mineralogical analysis by X-ray diffraction (XRD), and the morphological and elemental composition by scanning electron microscopy (SEM) on 2.2 cm × 1 cm × 1.5 cm limestone samples. The petrophysical properties as spectrophotometry, Leeb hardness test and contact angle, were measured on 5 cm × 5 cm × 3.5 cm limestone samples. In addition, XRD studies were carried out on the CZ-treated and -untreated stones under laboratory conditions and exposed to the natural environment. The results obtained through an accelerated chamber of relative humidity (RH, 80%) and temperature (25 °C) showed an improvement in Leeb hardness and contact angle, without affecting the color of the stone. Therefore, it is proposed that the warm conditions of relative humidity and temperature favor the consolidation, as the pores are filled by the binding of calcite grains as seen by SEM. After 15 days of exposure, a rapid transformation of portlandite into calcite was observed, while at 30 days, calcite and zincite can still be detected by XRD. The combination of SEM and XRD techniques, together with the measurement of petrophysical properties, corroborated these results, showing the homogenization of the surfaces of the samples due to the decrease of cracks, the filling of cavities, and pores; therefore, this treatment favored its resistance. The XRD results further confirmed the presence of CZ after 30 days under the both laboratory and natural conditions, and its degradation into calcite and zincite was still ongoing after 90 days of exposure.

In-situ Formation of an Aluminum Phosphate Coating with High Calcite-Lattice Matching for the Surface Consolidation of Limestone Relics

Carboxymethyl Chitosan As a Reversible Template of Calcium Phosphate for Multifunctional Conservation of Carbonate Stone.

Preliminary assessment of the efficacy of nano-MgO-based dispersion for the consolidation of artificial weathered sandstone

A novel immersive calcium carbonate coating for conservation of limestone relics with gypsum crust

Research on High-Strength and Rapid-Hardening Magnesium Phosphate As a Novel Bonding Material for Limestone Artifacts

Deposition of insoluble calcium phosphate layers by combining finely dispersed calcium hydroxide sols with soluble phosphates

Preliminary Investigation of Sequential Application of Different Calcium Oxalate Solutions for Carbonate Rock Conservation

Amorphous Alumina ALD Coatings for the Protection of Limestone Cultural Heritage Objects

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Surface Stability and Morphology of Calcium Phosphate Tuned by pH Values and Lactic Acid Additives: Theoretical and Experimental Study

Characterization of limestone and its behavior in different conditions after treatment with CaZn2(OH)6·2H2O nanoparticles

Biomimic conservation of weathered calcareous stones by apatite

Research on accelerated testing method and surface three-dimensional morphological characteristic evolution of limestone under acid rain environment

An effective and novel pore sealing agent to enhance the corrosion resistance performance of Al coating in artificial ocean water

Tuning Coordination Modes and Nucleation of Calcium Phosphate with Oligomeric Lactic Acid and pH Values: Theoretical and Experimental Study

Preparation of infiltrating calcium carbonate layer in gypsum substrate using novel calcium precursor: the implication for the protection of the surface weathered carbonate heritages from water erosion damage

Evaluating the Protective Effects of Calcium Carbonate Coating on Sandstone Cultural Heritage

Synthesis and Characterization of a Novel Biomaterial for the Conservation of Historic Stone Buildings and Sculptures

Bioinspired preparation of a protective biomineralized material on the surfaces of historic stones

Effectiveness and mechanism of aluminum/iron co-modified calcite capping and amendment for controlling phosphorus release from sediments

Effect of Laser Surface Texturing Depth and Pattern on the Bond Strength and Corrosion Performance of Phosphate Conversion Coating on Magnesium Alloy