Abstract:Thermochemical energy storage (TCES) by means of reversible chemical reactions represents a promising strategy for harnessing renewable energy and recovering industrial waste heat. In this work, alkali metal nitrate promoted MgO composites were synthesized, and the MgO–CO2 working pair was suggested as an alternative candidate for harvesting intermediate-temperature industrial waste heat. However, it remains unclear how operating parameters would affect the heat storage density, and the long-term cycling stability of the alkali metal nitrate promoted MgO composites under harsh conditions close to practical application scenarios needs to be clarified. The objectives of this work are to expound the effects of operating parameters on TCES performance and to evaluate the long-term cycling stability of the alkali metal nitrate promoted MgO composites. With increasing NaNO3 content, the heat storage density of NaNO3–MgO increases dramatically first and then exhibits no significant change. With rising carbonation temperature, the heat storage density of the 10NaNO3–MgO composite increases first and then declines marginally, while it increases with the increasing CO2 partial pressure. Doping alkali metal nitrate eutectic mixtures adversely affects the heat storage density. 10NaNO3–MgO exhibits a high heat storage density of 2291 kJ/kg at 340 °C in 100% CO2. The 10NaNO3–MgO and 10(K–Na)NO3–MgO composites suffer a significant decline in heat storage density within 10 consecutive cycles, while 10(Li–Na)NO3–MgO retains good stability with a slight decrease of heat storage density from 1073 to 770 kJ/kg in 50% CO2. The desired 10(Li–Na)NO3–MgO is suggested as a promising material for TCES application.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01681.Figure S1. EDS spectra of the 10(K–Na)NO3–MgO and 10(Li–Na)NO3–MgO composites. Figure S2. CO2 sorption rates of MgO and the NaNO3 promoted MgO composites. Figure S3. CO2 sorption rates of 10NaNO3–MgO tested under different carbonation temperatures. Figure S4. CO2 sorption rates of 10NaNO3–MgO tested under different CO2 partial pressures. Figure S5. CO2 sorption rates of the alkali metal nitrates eutectic mixtures promoted MgO composites. Figure S6. CO2 sorption rates of (a) the 10NaNO3–MgO and (b) the 10(Li–Na)NO3–MgO composites in multiple cycles (PDF)This article has not yet been cited by other publications.

Decomposition Performance and Kinetics Analysis of Magnesium Hydroxide Regulated with C/N/Ti/Si Additives for Thermochemical Heat Storage

Kinetics and Structural Optimization of Cobalt-Oxide Honeycomb Structures Based on Thermochemical Heat Storage

Investigation of catalytic modification of light magnesium based hydrogen storage material

The Non-isothermal Kinetic Analysis of Thermal Decomposition of Mg(OH)2

Excellent Catalysis of Various TiO 2 Dopants with Na 0.46 TiO 2 in Situ Formedon the Enhanced Dehydrogenation Properties of NaMgH 3

Activity Enhancement of MgCO3/MgO for Thermochemical Energy Storage by Nitrate-Promoted and Morphology Modification

Thermochemical heat storage performance of Fe-doped MgO/Mg(OH) 2 : Experimental and DFT investigation

Experimental Study of MgO/Mg(OH)2 Thermochemical Heat Storage with Direct Heat Transfer Mode

Structure-activity Relationship Between Pore Morphology and Thermochemical Energy Storage Properties Based on MgCO3/MgO

Doping effects on magnesium hydroxide: Enhancing dehydration and hydration performance for thermochemical energy storage applications

Excellent Catalysis of Various TiO<sub>2</sub> Dopants with Na<sub>0.46</sub>TiO<sub>2</sub> in Situ Formed on the Enhanced Dehydrogenation Properties of NaMgH<sub>3</sub>

Alkali Metal Nitrates Promoted MgO Composites with High CO2 Uptake for Thermochemical Energy Storage

Investigation on Application Temperature Zone and Exergy Loss Regulation Based on MgCO3/MgO Thermochemical Heat Storage and Release Process

Non-isothermal Decomposition Kinetics of Nano-Mg(oh)2 Using Thermal Gravimetric Analysis

Improved Durability in Thermochemical Energy Storage Using Ti/Al/Mg Co-doped Calcium-based Composites with Hierarchical Meso/Micro Pore Structures

A Molecular Dynamics Approach and Experimental Validation

Hygroscopic additive-modified magnesium sulfate thermochemical material construction and heat transfer numerical simulation for low temperature energy storage

Development and Characteristics Analysis of Salt-Hydrate Based Composite Sorbent for Low-Grade Thermochemical Energy Storage

Alkali Metal Nitrates Promoted MgO Composites with High CO 2 Uptake for Thermochemical Energy Storage

Fabrication and Properties of n‐Octadecane/nano‐MgO/Expanded Graphite as a Thermal Storage Material

MgCr2O4-Modified CuO/Cu2O for High-Temperature Thermochemical Energy Storage with High Redox Activity and Sintering Resistance