Abstract:The increasing rates of plastic production and waste plastic accumulation pose a serious challenge to the society, environment, and economy. Current mechanical recycling process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process, which calls for more efficient recycling strategies. Catalytic microwave-assisted pyrolysis could serve as a feasible approach to chemical recycling of waste plastics and producing fuel and petrochemical feedstocks such as naphtha. This lecture presents a series of our recent work on the aspects of pyrolysis reactor design and catalyst development with the goal of advancing this technology towards industrial applications. A lab-scale continuous microwave-assisted pyrolysis system with a processing capacity of 200 kg plastics per day was developed, which features continuous downdraft operation and a mixing ball bed reactor. The incorporation of silicon carbide as microwave absorbents into the microwave heating process enabled fast, uniform and energy-efficient heating for the process. A baseline test of the system using conventional ZSM-5 catalyst obtained a 57 wt.% yield for C5-C22 liquid hydrocarbons from polyolefin-based plastics. Energy saving of the process compared to production of similar products from virgin materials was estimated to be 32% by using the Materials Flows through Industry supply chain analysis tool. In order the improve the yield and quality of the liquid hydrocarbon products, a series of catalysts were tested and compared on a lab-scale setting. Notably, relay catalysis of Al2O3 followed by ZSM-5 achieved up to 100% conversion into monoaromatics and C5-C12 alkanes/olefins at a catalyst to plastic ratio of 4:1; Y5.1, F20 zeolites and Al2O3 promoted the production of alkanes and alkenes mainly in the C5-C23 range; MCM-41 led to the formation of C13C23 alkanes and alkenes with a selectivity of 86.6%; ZSM-5 favored the production of aromatics with a selectivity of 70%. In addition to developing and selecting the proper catalyst material, the catalytic reactor also needs to be carefully designed such that sufficient heat and mass transfer within the catalyst bed is ensured during operation and the catalyst regeneration procedure can be conveniently practiced. Conventional designs such as the randomly packed bed could be problematic in the process since catalyst deactivation and coke/wax build-up is very likely. A probable solution to this issue is a structured catalytic reactor consisting of a structured packing with coated catalysts, e.g. ZSM-5 coatings on a SiC foam support. This structured catalyst has been tested in a lab-scale setting for upgrading pyrolytic vapours and results showed that it outperformed many other catalytic reactor designs in terms of catalytic activity and stability. In addition, the composite catalysts could be regenerated and reused while well preserving its material properties and catalytic activity after multiple reaction-regeneration cycles.

Microwave-assisted Fluidized Bed Reactor Pyrolysis of Polypropylene Plastic for Pyrolysis Gas Production Towards a Sustainable Development

Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

Gases Production from Microwave-Assisted Pyrolysis of Polypropylene Plastic

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Experimental Investigation on Air Gasification of Polypropylene Particles in a Microwave Fluidized Bed Reactor

Microwave-assisted pyrolysis of polypropylene plastic for liquid oil production

Catalytic microwave-assisted pyrolysis for chemical recycling of plastic waste

Modeling and simulation of microwave assisted catalytic pyrolysis system of waste plastics polymer for fuel production

A review on liquid fuel produced from microwave-assisted pyrolysis of plastic waste

Basic Study On Plastic Pyrolysis In Fluidized Bed With Continuous-Feeding

Progress of Research on Chemical Upcycling of Plastic Waste Based on Pyrolysis

Oil recovery from microwave co-pyrolysis of polystyrene and polypropylene plastic particles for pollution mitigation

Sustainable Microwave-Driven CO2 Gasification of Plastic Waste for High-Yield H2 and CO Production

A Review on the Microwave-Assisted Pyrolysis of Waste Plastics

Air Gasification of Polypropylene Plastic Waste in Fluidized Bed Gasifier

Microwave-assisted catalytic technology for sustainable production of valuable chemicals from plastic waste with enhanced catalyst reusability

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor

Microwave‐assisted Pyrolysis‐A new way for the sustainable recycling and upgrading of plastic and biomass:A review

The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals.

Microwave-assisted pyrolysis of plastics for aviation oil production: energy and economic analyses

Cleaner production of aviation oil from microwave-assisted pyrolysis of plastic wastes