Abstract:In order to improve the flexibility and adaptability of micro nuclear power systems, air is considered as an optional working fluid of nuclear Brayton cycle. It has ability to avoid shortage of working fluid under extreme conditions, and ensure the system operating with tight supply. Compared with the traditional open cycles, the closed cycle has advantages of higher cycle efficiency, smaller equipment size and higher power density. Few of closed air power cycle in nuclear power system has been studied by now. In this paper, cycle parameters were analyzed and designed, and optimal cycle performance was compared between cycle constructions. Four closed air Brayton cycles are proposed and modeled in EBSILON 15.0, including simple regenerative cycle (SRC), intercooling regenerative cycle (IRC), reheat regenerative cycle (RRC) and intercooling-reheat regenerative cycle (IRRC). Thermodynamic analysis of the key parameters is conducted, including pressure ratio, turbine inlet temperature, compressor inlet temperature and pressure. In addition, the genetic algorithm (GA) is applied for multi-parameters optimization for the maximal cycle efficiency. Result shows that with the increase of pressure ratio, the efficiency of SRC increases firstly and then decreases. With the increase of turbine inlet temperature, the pressure ratio corresponding to the maximal cycle efficiency increases gradually. Specific work gradually increases with pressure ratio. In higher turbine inlet temperature, the rising velocity of specific work is faster. Cycle efficiency increases with compressor inlet pressure, and this trend tend to be slower in high pressure region. With the increasing of compressor inlet pressure, optimal pressure ratio decreases and finally approaches to 2.0. The cycle minimal cycle pressure was selected as 6 MPa. Maximal efficiency and corresponding pressure ratio increase with turbine inlet temperature increasing and decrease with compressor inlet temperature increasing. Comparing with SRC, RRC brings 1.16% cycle efficiency promotion, and IRC presents significant specific work increasing. In cycle efficiency distribution contour map of pressure ratio-middle pressure ratio, design point should be selected in high efficiency area. IRRC reaches 39% maximal cycle efficiency and maximal specific power 0.118 MW/(kg/s) of CABC.

Paper Investigation the performance of the recompression Brayton cycle with different N2O-based binary mixtures for a nuclear power spacecraft

Investigation on the Thermodynamic Performance and Machinery Mass in the N2O-based Mixtures Recompression Brayton Cycle for a Nuclear-Powered Spacecraft

Investigation on the thermodynamic performance and machinery mass in the N 2 O-based mixtures recompression Brayton cycle for a nuclear-powered spacecraft

Optimization of a Recompression Supercritical Nitrous Oxide and Helium Brayton Cycle for Space Nuclear System

Properties of Nitrous Oxide and Helium mixtures for space nuclear recompression Brayton cycle

Thermodynamic Performance of an Innovative Space Nuclear Brayton Cycle with S–N2O

Thermodynamic performance of an innovative space nuclear Brayton cycle with S–N 2 O

Thermodynamic, Exergoeconomic and Multi-Objective Analyses of Supercritical N2O-He Recompression Brayton Cycle for a Nuclear Spacecraft Application

An Innovative S–CO2 Recompression Brayton System and Its Thermodynamic, Exergoeconomic and Multi-Objective Analyses for a Nuclear Spacecraft

An innovative S–CO 2 recompression Brayton system and its thermodynamic, exergoeconomic and multi-objective analyses for a nuclear spacecraft

Study on Thermodynamic Performance of Nuclear Power Propulsion System in Spacecraft

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle

Thermodynamics Properties of Binary Gas Mixtures for Brayton Space Nuclear Power System

Thermodynamic, Exergoeconomic Evaluation and Optimization of S-N2O/t-N2O Nuclear Power Cycle for the Construction of the Lunar Base

Mass optimization of a recompression supercritical nitrous oxide and helium power system for space exploration

Investigation on the effect of mixtures physical properties on cycle efficiency in the CO2-based binary mixtures Brayton cycle

Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor

Effects of Mixed Inert Gases on Design of Centrifugal Compressors for Space Nuclear Reactor

Transcritical CO2 Mixture Power for Nuclear Plant Application: Concept and Thermodynamic Optimization

Thermodynamic Analysis and Optimization of Nuclear Closed Air Brayton Cycle

Performance Evaluation of a Direct Air-Cooled Supercritical Recompression Brayton Cycle Using CO2/n-Butane As the Working Fluid Operating under Off-Design Conditions