Abstract:Spatially dependent low-temperature to room-temperature degradation mechanisms for Li(Ni0.5Mn0.3Co0.2)O2/LixC6 (NMC532/graphite) large format 50Ah Li-ion batteries were investigated. First, highly stressed regions of the cathode/anode are found to be exacerbated by extreme conditions (i.e., low-temperature cycling). The severe electrochemical polarization of large 50Ah electrodes at low temperature leads to substantial Li0 deposition and severe gassing at the regions of high stress (i.e., high curvature, edges, and electrode ripples). A series of analytical techniques (e.g., SEM, XPS, GC-MS, and Raman spectroscopy) found that Li0 plating (charge) or corrosion (storage) leads to severe gassing and decomposition products (including carbides). The expansion/contraction and extreme polarization during low-temperature cycling, was found to cause a ripple-type Li0 deposition on the electrode. Multilocation liquid nitrogen (N2) Raman spectroscopy of electrodes indicates significant quantities of Li0 deposition reside at ripple peaks (high-stress region) and are found negligible at ripple troughs. Postmortem analysis discovered two failure scenarios that originate from low-temperature cycling, either nonthermal runaway venting or an internally shorted thermal runaway. It was found in the first case (storage) that LiC6–Li0 undergoes severe corrosion and gassing during storage conditions (i.e., no movement, current, and temperature) and proceeds to trigger thermal runaway and ejection of materials (∼2 weeks). The second case (RT cycling after low temperature) resulted in nonthermal runaway overpressurized venting of the cell and release of detectable quantities of flammable/toxic gases (e.g., CO2, CO, CH4, and C2H2). The second event was found to be caused by competing reactions (i.e., Li0 stripping, Li0 corrosion, and severe gassing). This study finds that low-temperature Li0 plating and LiC6–Li0 corrosion results in severe gassing, which exacerbates highly stressed regions (i.e., electrode buckling) and greatly compromises safety of the application— via nonthermal runaway venting when cycled (e.g., stripping of Li0 and gassing) and catastrophic thermal runaway when resting under storage (e.g., larger quantities of LixC6–Li0 corrosion).

Slight Overcharge Aging Behaviors and Thermal Runaway Characteristics of Li(Ni0.5Co0.2Mn0.3)O2/Graphi Te Batteries at Different Ambient Temperatures

Capacity Fading and Thermal Stability of LiNixCoyMnzO2/graphite Battery after Overcharging

Impact of Low Temperature Exposure on Lithium-Ion Batteries: A Multi-Scale Study of Performance Degradation, Predictive Signals and Underlying Mechanisms

Thermal Behavior and Failure Mechanism of Lithium Ion Cells During Overcharge under Adiabatic Conditions

LiNi0.5Co0.2Mn0.3O2/graphite batteries storing at high temperature: Capacity fading and raveling of aging mechanisms

Study on Thermal Safety of the Overcharged Lithium-Ion Battery

Thermal Runaway Induced by Dynamic Overcharge of Lithium-Ion Batteries under Different Environmental Conditions

Heat generation and thermal runaway mechanisms induced by overcharging of aged lithium-ion battery

Aging Effect Delays Overcharge-Induced Thermal Runaway of Lithium-Ion Batteries

Aging Mechanisms and Thermal Stability of Aged Commercial 18650 Lithium Ion Battery Induced by Slight Overcharging Cycling

Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite-SiOx power batteries under high temperature and discharge cycling conditions

Failure Mechanism and Thermal Runaway in Batteries during Micro-Overcharge Aging at Different Temperatures

Unraveling the Capacity Fading Mechanisms of LiNi0.6Co0.2Mn0.2O2 at Elevated Temperatures

Simulation Study on Thermal Runaway of Lithiumion Batteries in Different Aging States

Degradation Mechanism of LiNi 0.5 Co 0.2 Mn 0.3 O 2 /Graphite Cells at Elevated State of Charge and High Temperature

Low-Temperature Lithium Plating/Corrosion Hazard in Lithium-Ion Batteries: Electrode Rippling, Variable States of Charge, and Thermal and Nonthermal Runaway

Thermal behavior and failure mechanisms of 18650 lithium ion battery induced by overcharging cycling

Abuse Tolerance Behavior Of Layered Oxide-Based Li-Ion Battery During Overcharge And Over-Discharge

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Thermally Driven Mesoscale Chemomechanical Interplay in Li0.5Ni0.6Mn0.2Co0.2O2 Cathode Materials