Abstract:Phase change materials (PCMs) are materials that can store large amounts of heat during their phase transition from solid to liquid without a significant increase in temperature. While going from liquid to solid this heat is again released. As such, these materials can play an important role in future energy-efficient buildings. If applied in facades as part of a thermal buffer strategy, e.g., capturing and temporarily storing solar energy in so-called Trombe walls, the PCMs are exposed to high solar radiation intensities, which may easily lead to issues of overheating. This paper therefore investigates the melting process of PCM and arrives at potential solutions for countering this overheating phenomenon. This study uses the simulation program Comsol to investigate the heat transfer through, melting of and fluid flow inside a block of PCM (3 × 20 cm2) with a melting temperature of around 25 °C. The density, specific heat and dynamic viscosity of the PCM are modeled as a temperature dependent variable. The latent heat of the PCM is modeled as part of the specific heat. One side of the block of PCM is exposed to a heat flux of 300 W/m2. The simulations show that once part of the PCM has melted convection arises transporting heat from the bottom of the block to its top. As a result, the top heats up faster than the bottom speeding up the melting process there. Furthermore, in high columns of PCM a large temperature gradient may arise due to this phenomenon. Segmenting a large volume of PCM into smaller volumes in height limits this convection thereby reducing the temperature gradient along the height of the block. Moreover, using PCMs with different melting temperature along the height of a block of PCM allows for controlling the speed with which a certain part of the PCM block starts melting. Segmenting the block of PCM using PCMs with different melting temperature along its height was found to give the most promising results for minimizing this overheating effect. Selecting the optimal phase change temperatures however is critical in that case.

Integration of Phase Change Material and Thermal Insulation Material As a Passive Strategy for Building Cooling in the Tropics

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Advancing sustainable building through passive cooling with phase change materials, a comprehensive literature review

Phase change materials integrated buildings: A short review

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations

Phase change with inner ventilation for energy management: Roofs buildings in hot & dry climates case

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Parameter optimization of phase change material and the combination of phase change material and cool paint according to corresponding energy consumption characteristics under various climates

Energy Conservation of Residential Buildings in Extreme Climates with Phase Change Material-Aluminum Radiation Reflector Cool Roof

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

New structure for better thermal resistance of building with phase change material: Response to milder thermal change than common walls

Parametric Analysis of the Phase Change Material Wall Combining with Micro-Channel Heat Pipe and Sky Radiative Cooling Technology

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study

Numerical study on thermal comfort and energy-saving potential of a prefabricated temporary house integrated with composite phase change materials

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

Advanced building envelope by integrating phase change material into a double-pane window at various orientations