Abstract:This article is concerned with the identification of industrial robot dynamics parameters, and an identification method based on a nonlinear friction model and a least squares (LS) with symbiotic organisms search (SOS) algorithm is proposed. First, according to the friction characteristics of robot joints, for the nonlinear Tustin friction model, two parameters are introduced to describe the Stribeck characteristics of Coulomb friction and static friction. Then, the joint velocity trajectory that can offset the nonfriction torque during the forward and reverse rotation is designed, and friction parameters are estimated by using LS. Based on the optimal criterion constructed by Hadamard’s inequality, the excitation trajectory represented by the Fourier series is designed, and the combined inertial parameter set is estimated by using LS. Second, select the minimum inertial parameters and friction parameters (minimum dynamic parameters) as the center points to search the upper and lower bounds; design the fitness function with adjustable weights of each joint and use the SOS algorithm to estimate the minimum dynamic parameter set as a whole. Finally, a variety of parameter identification algorithms are applied to the Stäubli TX-90 robot under the same excitation trajectory. The experiment results show that the root-mean-square (rms) error of the joint torque estimated by the proposed method is the smallest. By executing the verification trajectory, the experiment results show that the rms error of the joint torque is small and the correlation coefficient is close to 1, thereby verifying the effectiveness of the estimated model for different motion trajectories.

An Iterative Identification Method for the Dynamics and Hysteresis of Robots with Elastic Joints

A Two-Stage Parameter Identification Method and Compensation Verification for Heavy Load Robot

Inverse model–based iterative learning control on hysteresis in giant magnetostrictive actuator

Closed-Loop Dynamic Parameter Identification of Robot Manipulators Using Modified Fourier Series

Dynamics Parameter Identification of Articulated Robot

A new closed-loop output error method for parameter identification of robot dynamics

Parameter Identification of Hydraulic Manipulators Considering Physical Feasibility and Control Stability

Identification of Bouc-Wen Hysteretic Systems Based on a Joint Optimization Approach

Dynamic parameters and friction model identification of an industrial hybrid robot

Identification of Robotic Systems with Hysteresis Using Nonlinear AutoRegressive Exogenous Input Models

An Approach for Identifying Dynamic Parameters in Robotic Systems With Inconsistent Joint Measurements

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

A Two-Step Method for Dynamic Parameter Identification of Indy7 Collaborative Robot Manipulator

Dynamic Identification of Industrial Robot Based on Nonlinear Friction Model and LS-SOS Algorithm

System Identification For Constrained Robots

Joint torque estimation method of industrial robot by combining error compensation model based on LSTM and iterative weighted parameter identification

Dynamic Parameter Identification of a Human-Exoskeleton System with the Motor Torque Data

An Identification Method for Dynamic Systems with SCNs Hysteresis Compensator: Application to the Inchworm Piezo Motor

Dynamic Identification for Robot Manipulators Based on Modified Fourier Series

Modeling and Identification for High-Performance Robot Control: An RRR-Robotic Arm Case Study

A parameter identification method of horizontal robot arms