Abstract:We added CaCO3 whiskers into polyvinyl alcohol (PVA)-steel hybrid fiber system to obtain multiscale hybrid fiber reinforced cement mortar (MHFRC). Three-point bending (3-p-b) tests were carried out on 64 notched beams to investigate fracture behavior of MHFRC. Double K Fracture Criterion (DKFC) and Work Fracture Method (WFM) were employed to obtain fracture parameters. Influence of the volume fraction of CaCO3 whiskers, content of PVA-steel hybrid fiber and water/ cement ratio (w/c) on fracture parameters are discussed. Addition of composite fibers consisting of CaCO3 whiskers and PVA-steel hybrid fibers could improve fracture behavior of MHFRC. As the content of CaCO3 whiskers increases, fracture parameters first increase and then decrease. Content of PVA-steel fibers also affect fracture behavior of the matrix. Thus, an optimum ratio between CaCO3 whiskers and PVA and steel fibers contents exist that provide the best fracture performance of cement matrix: 1 vol% of CaCO3 whiskers, 0.5 vol% of PVA fibers and 1.5 vol% of steel fibers (S15P05W10). Influence of the w/c value is also discussed. Fracture toughness (K-IC) and fracture energy (G(F)) of S15P05W10 group decreased as w/c values increased. The synergy of fibers in S15P05W10 was evaluated quantitatively, and the results indicated positive synergy effect on unstable fracture toughness (K-IC(un)) and fracture energy (G(F)) in cement matrix with higher w/c values. Negative synergy was observed for the initial fracture toughness (K-IC(ini)) Comprehensive reinforcing index (RIv) was introduced as the characteristic parameters of the hybrid fibers. Fracture parameters increased first and then decreased as RIv increased. Furthermore, the microscope morphologies of CaCO3 whiskers, PVA and steel fibers in the cement matrix were shown. These results helped to establish microscopic reinforcing mechanism of the hybrid fibers in the cement matrix. Based on the experiment results, empirical formulas, which taking into account fiber factor RIv and matrix factor w/c, were proposed to calculate fracture parameters of MHFRC.

Bending performance and calculation of reinforced beam with hybrid fiber and CaCO3 whisker

Characterization of bending performance of reinforced cementitious composites beams with hybrid fibers after exposure to high temperatures

Fracture Behavior of Cement Mortar Reinforced by Hybrid Composite Fiber Consisting of CaCO3 Whiskers and PVA-steel Hybrid Fibers

The relationship between reinforcing index and flexural parameters of new hybrid fiber reinforced slab

Reinforcement Effects of Multi-Scale Hybrid Fiber on Flexural and Fracture Behaviors of Ultra-Low-weight Foamed Cement-Based Composites

Effect of Hybrid Fibers on Bending Capacity of High-Performance Concrete Deep Beams

Mechanical Performance of CFRP Enclosed Reinforced Concrete Beams by Different Shear Reinforcement

ENHANCEMENT OF FLEXURAL PERFORMANCES THROUGH FRP HYBRIDIZATION WITH HIGH-MODULUS TYPE CARBON FIBERS

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents

Flexural Performance of Concrete Beams Reinforced with Continuous FRP Bars and Discrete Steel Fibers under Cyclic Loads

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF HYBRID FIBER REINFORCED SELF-COMPACTING CONCRETE BEAMS

Experimental study of flexural behavior of hybrid fiber reinforced deep beam

Research on the Flexural Behavior of Polypropylene Fiber Reinforced Concrete Beams with Hybrid Reinforcement of GFRP and Steel Bars

Influence of CaCO3 Whiskers and PVA Fibers on the Flexural Properties of Steel Fiber–Reinforced Cementitious Composites

Effect of Hybrid Fibers on Flexural Performance of Reinforced SCC Symmetric Inclination Beams

Experimental and theoretical research on flexural performance of RC beams strengthened with hybrid fiber sheets

Experimental study on flexural behavior of RC beams strengthened with FRP/SMA composites

Effect of Hybrid Fibers, Calcium Carbonate Whisker and Coarse Sand on Mechanical Properties of Cement-Based Composites

Uniaxial tensile behavior and mechanism characterization of multi-scale fiber-reinforced cementitious materials

Using Calcium Carbonate Whisker in Hybrid Fiber-Reinforced Cementitious Composites

Experimental and theoretical investigations on flexural performance of hybrid fiber reinforced ECC-NC composite beams