Abstract:As one of the important parts of the space system, the reliability of the SRAM storage circuit always affects the safety of the spacecraft. The harsh environment full of radiation and extreme temperature in space brings radiation effect and aging effect to the circuit, which causes accidental damage and life reduction of the device, and in serious cases, circuit error and system failure. In this paper, from the perspective of fault model and fault injection, the hybrid modeling method of device level and circuit level is adopted to establish the fault model. At the same time, the sensitive area and the randomness of the fault are considered, and the switching factor is introduced to comprehensively consider the fault injection to improve the accuracy of the model. A device-level Metal-OxideSemiconductor Field-Effect Transistor (MOSFET) simulation model is established in Technology Computer-Aided Design (TCAD), and the process calibration of the established MOSFET model is carried out through the process library file, to better approximate the actual model. Combined with the established MOSFET device model, the failure mechanism of single-particle effect in radiation effect and negative bias temperature instability effect in aging effect was studied. Based on the physical mechanism of the device level, the fault is mapped to the circuit level and the corresponding hybrid model is established. Combined with the advantages of the Veriloga language, the current source, and voltage source models are established, and the fault sensitive area and the randomness of fault occurrence are considered, and the switching factor is introduced into the fault model. Then, the established fault model is injected into the SRAM storage circuit in the form of fault devices for fault simulation, and the power current data is collected and compared with the fault model without a switching factor. Taking the measured data as a reference, the data errors of the two are compared. Experimental results show that the proposed fault model fits the actual data better and has higher accuracy.

Fault Model Analysis of DRAM under Electromagnetic Fault Injection Attack

Cache RAM inductive fault analysis with fab defect modeling

Fault Injection Model of SRAM Memory Circuit Based on Hybrid Modeling

Electromagnetic fault injection against a System-on-Chip, toward new micro-architectural fault models

Electrothermal Simulation of Resistive Random Access Memory(RRAM) Array Using Finite Difference Method

Electromagnetic fault injection: towards a fault model on a 32-bit microcontroller

Fault Injection and Failure Analysis on Xilinx 16nm FinFET Ultrascale+ MPSoC

Hardware Versus Software Fault Injection of Modern Undervolted SRAMs

Radiation-Induced Soft Error Analysis of STT-MRAM: A Device to Circuit Approach.

Defect-Based Empirical Model for On-State Degradation in Sub-20-nm DRAM Periphery pFETs Under Arbitrary Condition

Against Double Fault Attacks: Injection Effort Model, Space and Time Randomization Based Countermeasures for Reconfigurable Array Architecture

DRAMScope: Uncovering DRAM Microarchitecture and Characteristics by Issuing Memory Commands

Transient Fault Representativenesses Comparison Analysis

TrappeD: DRAM Trojan Designs for Information Leakage and Fault Injection Attacks

X-ray: Discovering DRAM Internal Structure and Error Characteristics by Issuing Memory Commands

Fault Injection of Strong Magnetic Pulse in Digital Integrated Circuit

Yield and Reliability Improvement Techniques for Emerging Nonvolatile STT-MRAM

Optical Fault Injection Attacks for Flash Memory of Smartcards

A Kind of SRAM-based FPGA SEE Fault Injection Method

On the Understanding and Modeling of Non-Negligible Subthreshold-State Degradation (SSD) in Sub-20-nm DRAM Technology

An Automated Fault Injection Platform for Fault Tolerant FFT Implemented in SRAM-Based FPGA