Abstract:As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 +/- 50 mW m(-2)) and the highest chemical oxygen demand removal rate constant (0.155 +/- 0.007 h(-1)) compared with the microbial fuel cell using the carbon cloth anode (1136 +/- 46 mW m(-2) and 0.072 +/- 0.008 h(-1)) or the wooden granular activated carbon anode (1045 +/- 32 mW m(-2) and 0.129 +/- 0.009 h(-1)). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L-1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m(-2), which is 18% higher than the wooden granular activated carbon anode (2.04 A m(-2)) and 400% higher than the carbon cloth anode (0.48 A m(-2)). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality. (C) 2019 Elsevier Ltd. All rights reserved.

Enhanced Electron Recovery by Optimizing Sandwich Structure Agricultural Waste Corncob Filled Anode in Microbial Electrochemical System to Facilitate Wastewater Denitrification

Recovery of electron and carbon source from agricultural waste corncob by microbial electrochemical system to enhance wastewater denitrification

Mn-C micro-electrolysis filler for nutrient removal in constructed wetlands: Performance evaluation and biochemistry processes

Enhanced Nitrate Nitrogen Removal from Constructed Wetland via Fe3O4/Granular Activated Carbon Anode Microbial Electrolysis Cell under Low C/N Ratio

Effects of High Ammonia Loading and In-Situ Short-Cut Nitrification in Low Carbon‑nitrogen Ratio Wastewater Treatment by Biocathode Microbial Electrochemical System.

Electrochemical denitrification by a recyclable cobalt oxide cathode: Rapid recovery and selective catalysis

Effect of Inocula on Performance of Bio-Cathode Denitrification and Its Microbial Mechanism

Enhanced Microbial Electrochemical Systems Performance by Optimizing the “Anode-Collector” Collection Mode: from Enhancement Mechanism to Construction Strategy

Efficient enriching high-performance denitrifiers using bio-cathode of microbial fuel cells

Bioelectrochemical processes and cellulosic carbon source enhance the autotrophic and heterotrophic denitrification of low C/N ratio wastewater in tidal flow constructed wetland - Microbial fuel cells

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Aerobic Denitrification Is Enhanced Using Biocathode of SMFC in Low-Organic Matter Wastewater

Enhancing Electricity Generation of Microbial Fuel Cell for Wastewater Treatment Using Nitrogen-Doped Carbon Dots-Supported Carbon Paper Anode

Effects of chemical oxygen demand/nitrogen on electrochemical performances and denitrification efficiency in single-chamber microbial fuel cells: Insights from electron transfer and bacterial communities

Optimization and Simulation of a Carbon-Based Flow-Through Composite Anode Configuration to Enhance Power Generation and Improve Effluent Quality Simultaneously for Microbial Fuel Cells

Construction of Innovative 3D-Weaved Carbon Mesh Anode Network to Boost Electron Transfer and Microbial Activity in Bioelectrochemical System

Enhanced denitrification driven by a novel iron-carbon coupled primary cell: chemical and mixotrophic denitrification

Spatially-assembled Binary Carbon Anode Synergizing Directional Electron Transfer and Enriched Microbe Accommodation for Wastewater Treatment and Energy Conversion: From Simulation to Experiments

N-Doped Carbon Nanowire-Modified Macroporous Carbon Foam Microbial Fuel Cell Anode: Enrichment of Exoelectrogens and Enhancement of Extracellular Electron Transfer

Revealing the performance of aerotolerant anodes for electroactive nitrification/denitrification and current production under coexistence of oxygen and nitrate conditions

Insight into a single-chamber air-cathode microbial fuel cell for nitrate removal and ecological roles