Enhanced Microbial Electrochemical Systems Performance by Optimizing the “Anode-Collector” Collection Mode: from Enhancement Mechanism to Construction Strategy

Jiannan Li,Guohong Liu,Dahong Chen,Chao Li,Dandan Liang,Fei Wang,Jing Wu,Weihua He,Yanling Yu,Yujie Feng

DOI: https://doi.org/10.1021/acsestengg.1c00396

IF: 7.1

2022-01-01

ACS ES&T Engineering

Abstract:The microbial electrochemical system (MES) provides a new idea for the recovery and utilization of energy contained in wastewater. Still, the inherent resistance of the commonly used carbon-based anode material of the system often leads to power loss during the electron collection process and reduces the system performance, especially in scale-up operations. Through experimental verification, we found that integrating a metal current collector into the anode and increasing its branches was an effective strategy to reduce power loss and enhance the system performance in the case of a limited area of a current collector. The system with five branches could obtain a higher maximum power density (1613.3 +/- 155.5 mW/m(2)), 1.36 times that of system with one collector branch (1185.1 +/- 29.1 mW/m(2)), and the corresponding power loss reduced by 86.7%. COMSOL software was used in MES to reveal the enhancement mechanism and provided effective "anode-collector" construction strategies. The simulation results indicated that at least three current collector branches should be integrated into the anode in scale-up MES to avoid excessive power loss. When using an optimized "anode collector" combination to treat domestic wastewater, the system could quickly capture energy in sewage (approximate to 20 h), and the effluent met the grade A standard of COD for municipal wastewater treatment plants in China (<50 mg/L). Moreover, this strategy only needed approximately $0.061 of cost per milliwatt of electricity generated, lower than the commonly used carbon brush anode ($0.08/mW). These results demonstrate that optimizing the "anode-collector" collection mode can effectively enhance energy harvesting and system performance with low cost and has promising potential for future practical applications. [GRAPHICS] .