Abstract:With the continuous increase in the size and power generation of turbines, the operational characteristics of turbines under off-design conditions are gradually receiving attention. In this paper, the Reynolds time-averaged method (RANS) is applied to the unsteady calculation of three different flow rate of a large Kaplan turbine under three heads: high head, rated head and low head. The focus is on the internal flow pattern of the turbine and the hydraulic excitation characteristics under low flow conditions. The unsteady characteristics of pressure pulsation, axial force of runner, radial force of runner and hydraulic torques along blade shank (τb) for six blades are analyzed. The results show that the pressure pulsation in the vaneless space is larger under low flow conditions, and frequencies of 0.33–1 fn ( fn is the rotating frequency of the runner) can be observed at monitoring points at different heights in the vaneless space. The analysis of the flow field under low flow conditions reveals the presence of larger scale vortices in the vaneless space. The position and intensity of vortices fluctuate periodically and cause larger amplitude pressure fluctuations. The frequency of 0.33–1 fn can also be observed for axial force, radial force, and τb for six blades due to the influence of vortices in the vaneless space. The low-frequency pulsations of pressure, force and τb are much greater under the low head and high head condition than that under rated head condition. The amplitude of pulsation of various parameters is the smallest under the low flow and rated head compared to that under the low flow conditions of other heads. The flow passage under low head is more influenced by the flow rate. Low-frequency pulsations occur under both the low flow and medium flow conditions. The asymmetry of the flow in the vaneless space causes unbalanced force and hydraulic instability of the runner, which seriously threatens the safe and stable operation of the turbine.

Research and Analysis on Model Measurement and Prototype Operation of Large-Scale Kaplan Turbine

Development of Numerical Performance Test Stand for A Kaplan Turbine

Pressure pulsation prediction by 3D turbulent unsteady flow simulation through whole flow passage of Kaplan turbine

Flow Simulation and Performance Prediction of a Kaplan Turbine

Numerical Simulation of the Performance of a Low-Head Prototype Kaplan Turbine

Evaluation of the prototype performance of Wanjiazhai Francis turbine with flow pattern analysis

Study on the Cavitation Characteristics of Shroud Clearance in Prototype and Model of a Kaplan Turbine

Numerical Simulation of Pressure Fluctuation in Kaplan Turbine

Numerical prediction and similarity study of pressure fluctuation in a prototype Kaplan turbine and the model turbine

Multibody dynamics analysis of a Kaplan turbine runner in full operating conditions

Dynamic Model of Kaplan Turbine Regulating System Suitable for Power System Analysis

Numerical Prediction of Hydraulic Performance in Model and Homologous Prototype Pelton Turbine

Evaluation of the Influence of Upstream Flow on the Energy Characteristics of a Giant Kaplan Turbine

The Characteristics Prediction and the Operating Comprehensive Performance Curve Drawing of Kaplan Turbine

Study on Pressure Pulsation and Force Characteristics of Kaplan Turbine

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Numerical Analysis on the Hydraulic Thrust and Dynamic Response Characteristics of a Turbine Pump

Numerical and Experimental Analysis of the Hydraulic Performance of a Prototype Pelton Turbine

Experimental Flow Performance Investigation of Francis Turbines from Model to Prototype

Numerical study on the performance characteristics of a high-head pump turbine based on the GEKO model

Numerical Study on the Flow and Structural Characteristics of a Large High Head Prototype Pump-Turbine under Different Operating Conditions