Abstract:Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some large-scale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/degrees C. It is expected that the apodized grating array can find more applications in many fields.

Research on Application of Distributed FBG in On-Line Temperature Sensing of Power Transformer

Fiber Bragg Grating Sensors for Temperature Monitoring in Oil-Immersed Transformers

Global Temperature Sensing for an Operating Power Transformer Based on Raman Scattering

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Online temperature monitoring system based on FBG for GIS bus

Fiber bragg grating technology used in temperature online monitoring for GIS bus contact

On the Feasibility of Monitoring Power Transformer's Winding Vibration and Temperature along with Moisture in Oil Using Optical Sensors

Application of Fiber Bragg Grating to Temperature On-Line Monitoring of GIS Busbar

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

Full-Scale Modeling and FBGs Experimental Measurements for Thermal Analysis of Converter Transformer

Real-Time Temperature On-Line Monitoring and Analysis System for Transformers

Research on novel optical fiber sensor network monitoring system for electrical equipment

Study on Multi-parameter On-line Monitoring System for Transformer Bushing

Low-cost optical fiber based temperature sensor for real-time health monitoring of power transformers

Study on the on-line insulation monitoring technique for transformer oil

A New Designed FBG and Φ-OTDR Hybrid System for Vibration and Temperature Sensing

Development and application of integrated multi-parameter on-line monitoring system for power transformer

On-line multi-sensor monitoring system for insulation condition of oil-immersed power transformer

Temperature Online Monitoring of Submarine Cable Based on BOTDA and FOCT

An on-line Monitoring Method for Vibration and Partical Discharge of Power Transformer

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array