Abstract:Fault detection of railroad signal cable is of great significance to the safety of railroad system. We propose an improved frequency-domain reflection (FDR) method based on simultaneous sampling of signal and noise for locating high-resistance faults, which is the most common fault in railroad signal cables. First, the return signal of the intact cable core and the inductive signal of the twisted pair are obtained by two-channel simultaneous sampling, and the two signals are Fourier transformed into spatial-domain waveforms. Second, the spatial-domain waveforms of the two signals have ambient noise and noise generated by multiple reflections at the transitions. We calculate the proportionality between the two spatial-domain waveforms by the least square method (LSM), denoted as the transmission factor. Finally, the fault line and its twisted pair are sampled synchronously during subsequent cable fault measurements. The fault line signal is subtracted from the product of the transmission factor and the twisted pair signal. The noise generated by the ambient noise and multiple reflections at the transfer is actively eliminated, highlighting the location of the fault and improving the localization effect of the original FDR method. A hardware system was designed based on this algorithm. The hardware system can transmit a 100-kHz–5-MHz frequency sweep signal to the cable, and the return signal required by the active noise reduction algorithm is collected by two-channel synchronized sampling and intermediate frequency (IF) sampling, and the data processing is subsequently carried out in the host computer. The improved algorithm proposed in this article achieves fault location for high impedance faults in cables below 1000 m, with a maximum resistance of 0.5 M . However, the traditional FDR methods cannot obtain effective positioning results, which verifies the effectiveness and superiority of the proposed method.

A Cable Hybrid Type Defect Localization Method Based on Frequency Domain Reflectometry

A Novel Method for Identifying Cable Defect and Improving Location Accuracy Based on Frequency Domain Reflectometry

A Novel Cable Defect Localization Technique Via Time-Frequency Domain Reflectometry

Defect Location and Identification Method for Long-Distance Cable Based on Frequency Modulated Continuous Wave

Frequency-Domain Localization Method for High-Resistance Faults in Railroad Signal Cables Based on Active Noise Reduction

Cable Defect Location by Using Frequency Domain Reflectometry with Synchrosqueezing Generalized S-Transform

Analysis of Electric Field Characteristics and Defect Diagnosis for Local Cable Breakage

Upper Sweeping Frequency Selection for Cable Defect Location Based on STFT

A Novel Accuracy Improvement Method for Cable Defect Location Based on Wave Velocity Correction Algorithm

A Novel Time–Frequency-Domain Reflectometry Location Method for Power Cable Defects Based on Synchrosqueezing Transform

Online Localization of Cable Partial Defects Using Broadband Transmission Coefficient Spectrum under Impulse Voltage

An Efficient Accuracy Improvement Method for Cable Defect Location Based on Instantaneous Filtering in Time-Frequency Domain

Localization and Assessment of Breakage Defect in Cables Based on Time–frequency Domain Reflectometry

A Cable Defect Location and Assessment Method Based on the Hilbert-Enveloped Reflection Coefficient

A Method for Online Monitoring Intermittent Cable Defects Based on SSTDR

Influence of Cross Bonding Structure on Impedance Spectrum of Cable and Fault Localization Results

An Efficient Cross-terms Suppression Method in Time-Frequency Domain Reflectometry for Cable Defect Localization

An Improved Algorithm of Cable Fault Diagnosis Considering Signal Attenuation Compensation

Research on the Influence Mechanism of Thermal Aging Degree of Cable on Frequency Domain Reflectometry and Defect Location Accuracy

Analysis and Diagnosis of Shielded Cable Faults Based on Finite-Element Method and Time-Reversal Time-Frequency Domain Reflectometry

Sensitivity Improvement in Cable Faults Location by Using Broadband Impedance Spectroscopy with Dolph-Chebyshev Window