Abstract:A novel design of the 532 nm Rayleigh–Mie Doppler lidar receiving system is carried out. The use of polarization isolation technology to effectively improve the receiving system optical reception efficiency, suppress the background noise, not only improves the system wind field detection accuracy, while achieving a high-accuracy temperature measurement. The wind speed and temperature measurement principle of the system are discussed in detail, and the triple Fabry–Perot etalon parameters are optimized. Utilizing the overall design parameters of the system, the system detection performance is simulated. The simulation results show that from 5 to 50 km altitude with vertical resolution of 0.1 km@5 ∼ 20 km, 0.5 km@20 ∼ 40 km, 1 km@40 ∼ 50 km, by using the laser with single pulse energy of 600 mJ, repetition frequency of 50 Hz and the receiving telescope with aperture of 0.8 m, with 2min integration time and in ± 50 m/s radial wind speed range, the radial wind speed measurement accuracies of our designed lidar in the day and night are better than 2.6 m/s and 0.9 m/s respectively, and its performance is obviously superior to that of traditional system 5.6 m/s and 1.4 m/s wind speed accuracies; with 10min integration time and in 210 ∼ 280 K temperature range, the temperature measurement accuracies of the system in the day and night are better than 3.4 K and 1.2 K respectively; since the wind speed sensitivities of the Mie and Rayleigh scattering signals are not exactly the same, in ± 50 m/s radial wind speed range, the wind speed bias induced by Mie signal is less than 1 m/s in the temperature range of 210–290 K and in the backscatter ratio range of 1–1.5 for pair measurement.

Influence of Linewidths and Pulse Widths of Single Frequency Pulsed Lasers on the Wind Velocity Measurement

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

A New Wind Speed Retrieval Method for an Ocean Surface Using the Waveform Width of a Laser Altimeter

Field-widened Michelson Interferometer for Spectral Discrimination in High-Spectral-resolution Lidar: Theoretical Framework.

Ranging Performance Model Considering the Pulse Pileup Effect for PMT-based Photon-Counting Lidars.

1.55-Μm Pulse Coherent LIDAR with 10-Km Detection Range

Performance of Continuous-wave Coherent Doppler Lidar for Wind Measurement

Performance analysis of dual-frequency lidar in the detection of the complex wind field

Numerical Simulation of 1.55 um Coherent Lidar for Wind Measurement

Research on optimizing the optical local-oscillator power of Coherent Doppler LiDAR to enhance wind velocity measurements

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

A Novel Wind Ladar System Based on 1.55μm All-Fiber Coherent Doppler Laser

A novel wind ladar system based on 1.55 mu m All-fiber Coherent

Wind velocity retrieval and field widening techniques of fringe-imaging Mach-Zehnder interferometer for Doppler lidar

Analysis on wind retrieval methods for Rayleigh Doppler lidar

Data Processing and Analysis of Eight-Beam Wind Profile Coherent Wind Measurement Lidar

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

Performance validation for wind measurement with multi-longitudinal mode double-edge detection

Mid-altitude wind measurements with mobile Rayleigh Doppler lidar incorporating system-level optical frequency control method

Fabry-Perot interferometer based Mie Doppler lidar for low tropospheric wind observation

Influence of photocurrent noise on detection performance of continuous coherent lidar