Abstract:The development of 5G technology has put forward new requirements for computing the abilities of chips, and chip power has also significantly increased. Consequently, the heat load of the rack will increase rapidly in the future. Traditional computer room air conditioning (CRAC) systems cannot satisfy the rack's high heat flux dissipation requirements, and new cooling forms such as chip-level cooling should be adopted. In this study, a two-stage chip-level cooling system, which is pumpless and waterless, offers flexible and detachable installation based on practical requirements, was proposed. The cooling system removes heat from the chips to the outdoors via two thermosiphon loops, where the heat is first transferred to cold plates tightly attached to the chip surfaces, then transferred through heat exchangers attached to the rack side, and finally dissipated outdoors through air cooling. In this study, a two-stage chip-cooling system was constructed and tested in an enthalpy-difference laboratory. The effects of the liquid filling ratio on the thermal resistance, total temperature difference, and fluid flow pattern under different heat loads were investigated. Second, a heat transfer model for analysing thermal resistance networks was constructed, and the proportions of different types of thermal resistance were determined. Third, an energy-saving analysis of the system is established. The experimental results showed that at single chip heat load 200 W and total heat load 2 kW, the heat transfer temperature difference between chips and outdoors is less than 20 degrees C at extremely high energy efficiency (cooling load factor reaches 0.05 at outdoor temperature 40 degrees C), which makes it feasible for free cooling throughout the year in most Chinese areas. The annual PUE in Beijing using the proposed system is 1.15, which indicates a 30 % reduction of the total energy consumption of data centres.

Experimental Study on a New Type of Cooling Device Used in High Heat Dissipation of CPU

Effects of different water-cooled heat sinks on the cooling system performance in a data center

Experimental study on the thermal performance of a liquid-cooled heat sink integrating heat pipes for dual CPU servers

Design and performance research of integrated indirect liquid cooling system for rack server

Research on Small-Scale Variable Capacity Evaporative Cooling Plate System for Chips with High Heating Flux

Realization of practical vapor compression cooling system for multiprocessor tower server

Design and Simulation of the Evaporator for Cooling System of the Blade Server

Recent Advance in Cooling Techniques for CPU

Experimental Research and Energy Effectiveness Analysis on Chip-Level Two-Stage Loop Thermosyphon System for Data Centre Free Cooling

Experimental Study on Water-Cooled Thermoelectric Cooler for CPU under Severe Environment

Design of Practical Liquid Metal Cooling Device for Heat Dissipation of High Performance Cpus

An Experimental Study on Cooling of CPU using a Two Phase Closed Thermosyphon Loop

Experimental Study on the Thermal Performance of Flat Loop Heat Pipe Applied in Data Center Cooling

A New Cooling Strategy for Edge Computing Servers Using Compact Looped Heat Pipe

Experimental study on the immersion liquid cooling performance of high-power data center servers

Design and simulation of evaporator for blade server case of cooling system

A Dumbbell-Shaped 3D Flat Plate Pulsating Heat Pipe Module Augmented by Capillarity Gradient for High-Power Server CPU Onsite Cooling

An Experimental Study on Energy-saving Control of Multi-fan Cooling Module

An experimental study of a novel high-performance heat pipe for chip cooling of desktop computer

Research progress of the liquid cold plate cooling technology for server electronic chips: A review

Experimental Study On Cpu Cooling System Of Closed-Loop Two-Phase Thermosyphon