Abstract:This study revealed a synthesis and characterization of pectin biopolymer from orange peel wastes and its effect on pineapple fiber-reinforced vinyl ester composite. The primary objective of this research study is to develop a biocomposite material using biomass-derived biopolymers. Similarly, another objective is whether the pectin biopolymer from orange peels could be a potential reinforcement for thermoset polymeric composites, which contain matrix-like vinyl ester. The thermochemical method is deployed to extract the pectin from orange peels and silane treated subsequently for better adhesion. The composite however reinforced by the pineapple fiber as primary reinforcement via a hand layup process and cured completely. Additionally, the composites were put through a 6-h post-curing process in a hot air oven at 120 °C. Further, the composites were tested via ASTM guidelines and the results were rigorously analyzed. According to investigation composite A2, which contains 2 vol. % silane-treated pectin biopolymer exhibited improved mechanical properties. The highest tensile strength of 160.5 MPa, flexural strength of 209 MPa, compression strength of 181.0 MPa, izod impact strength of 5 J, and hardness of 81 Shore-D were observed. Conversely, composite A3, which contains 4 vol. % silane-treated pectin biopolymer, demonstrated the highest thermal conductivity of 0.44 W/mK and the lowest propagation speed of 8.12 mm/min. Similarly, composite A3's antimicrobial effectiveness measured inhibition zones with 14.2 mm ( S. aureus ), 14.21 mm ( P. aeruginosa ), 14.9 mm ( K. pneumoniae ), and 14.25 mm ( E. coli ). In summary, this investigation emphasizes the potential of silane-treated pineapple fiber and pectin biopolymer to improve the performance of vinyl ester resin composites. Composite A2 demonstrates the most comprehensive mechanical and antimicrobial characteristics, whereas composite A3 is exceptional in terms of thermal conductivity and flammability resistance. This capable biocomposite could be used as a working material in the latest engineering areas such as automotive, drones, construction, and defense.

Utilization of Ananas comosus Crown Residue Husk as a Sustainable Strength Additive for EPR/LDPE Blend Composites

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications

Influence of layering variation with addition of bio-fillers on mechanical and thermal performances of hybrid polyester composites

Reusing industrial lime sludge waste as a filler in polymeric composites

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Valorization of Waste Wood Flour and Rice Husk in Poly(Lactic Acid)-Based Hybrid Biocomposites

Sustainable composites from agricultural waste: The use of steam explosion and surface modification to potentialize the use of wheat straw fibers for wood plastic composite industry

Enhancing mechanical performance of flax fiber/vinyl ester composites with coconut husk char: a sustainable approach for hybrid composite material

Experimental study on mechanical properties of groundnut shell particle-reinforced epoxy composites

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Sustainable jute fiber reinforced polylactic acid composite: Thermochemical and thermomechanical characteristics

Study on the modification of polyester resin bamboo fiber-based composite with euphorbia coagulum and their effect on mechanical and thermal properties

Enhancing vinyl ester composites with biocarbon from pineapple leaf fiber and dragon fruit peel waste: a characterization study

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Development of a Sustainable Polymer Composite: Enhancing Properties of Waste Plastic with Ground Tire Rubber Reinforcement

Development of silane-treated corn husk fiber and agro-waste biofiller-reinforced epoxy composite: effects on wear, mechanical, thermal, and water absorption properties

Mechanical and tribological behavior of pineapple leaf and kenaf fiber reinforced vinyl ester hybrid composites

Biodegradability and mechanical behavior of novel hybrid green composites fabricated with cashew shell particle, sisal fiber and corn starch resin

Synthesis and characterization of pectin biopolymer from orange peel wastes and its effect on pineapple fiber-reinforced vinyl ester composite

An initial investigation to explore the feasibility of fruit waste fillers for developing sustainable thermoplastic composites