Finite element simulation and experimental research on multi-pass hot deformation behavior of Ti-Zr composite microalloyed steel

ZHANG Fanlin,HAO Tianci,CAO Jianchun,LUO Hanyu,GAO Peng,YANG Yinhui

DOI: https://doi.org/10.13228/j.boyuan.issn1001-0963.20220082

2023-01-01

Abstract:In order to study the effect of deformation temperature and Zr content on the distribution of internal stress and strain and the microstructure evolution of austenite in Ti-Zr microalloyed steel during rolling deformation, the stress-strain curves and the grain size and distribution of austenite in three Ti microalloyed steels with different Zr contents were obtained by thermal simulation experiment and metallographic analysis. The results show that: deformation temperatures can reduce internal stress of three experimental steel, promote stress uniform distribution, and 0.12 Ti-0.02-Zr steel stress decreases most obviously. The addition of Zr will promote recrystallization nucleation of austenite of Ti microalloyed steel and precipitation of deformation induced precipitation of precipitated phase. Also, it increases the consumption of energy storage, so it is not easy to accumulate stress and strain in the process of deformation; however, excessive Zr will increase the deformation resistance of the experimental steel due to the large amount of precipitated phase, resulting in the accumulation of stress and strain. Overall consideration, when Ti-Zr composite microalloying technology is used to achieve the ultra-refinement and uniformity of austenite structure, the addition amount of Zr element should be controlled at about 0.02 wt.%.