Abstract:In this work, the sandwich‐like polyethylene terephthalate‐based and polypropylene‐based copper (Cu) current collector (CC) are fabricated via magnetron sputtering and electroplating. The lithium‐ion battery assembled by these two polymer‐based Cu CC exhibits good electrochemical cycling and mechanical safety. In addition, the corresponding mechanisms are first revealed. Commercial metalized plastic current collector (MPCC) is receiving widespread attention from the business and academic communities, due to its properties of excellent electrical conductivity and low mass density. However, the application of MPCC on the side of copper is rarely studied. Herein, sandwich‐like polyethylene terephthalate‐based (PET) and polypropylene‐based (PP) copper (Cu) current collectors via magnetron sputtering and electroplating are fabricated. Most importantly, the electrical performance, mechanical safety quality, and revealed the corresponding failure mechanism for the MPCC cells are first systematically evaluated. First, during the 45 °C electrical cycling tests, PET‐Cu CC (82.67%) and PP‐Cu CC (82.32%) cells both have comparable capacity retention with the traditional Cu CC (Tra‐Cu CC) cell (84.55%) after 500 cycles. The slight reduction in the cycling performance is induced by the crack of the Cu layer around the embedded SiO2 particle for PET‐Cu CC cell and the detachment of Cu layer for PP‐Cu CC cell. Second, during the nail‐penetration test, MPCC cells maintain no fire and explosion for more than 5 min, since the heat‐shrinkable function of polymeric film can interrupt the continuous Joule heat released by internal short‐circuit. This work provides important guidance for the large‐scale application of MPCC in the field of lithium‐ion batteries.

Copper-Coated Porous Polyimide As Ultralight and Safe Current Collectors for Advanced Libs

A facile method to fabricate lightweight copper coated polyimide film current collectors for lithium-ion batteries

Ultralight and High Thermal Conductive Current Collector Derived from Polyimide for Advanced LIBs

Polymer@Cu composite foils with through-hole arrays as lightweight and flexible current collectors for lithium-ion batteries

A Lightweight Carbon-Incorporated Polymer Current Collector for Improving the Performance and Safety of Lithium-Ion Batteries

Lightweight 3D‐net Copper‐Plated Polyimide Current Collector for Lithium‐Ion Batteries

Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Phytic-Acid-Modified Copper Foil as a Current Collector for Lithium-Ion Batteries

A flexible porous polyimide/copper composite film toward high-mass-loading anodes in lithium-ion batteries

Composite Copper Foil Current Collectors with Sandwich Structure for High-Energy Density and Safe Lithium-Ion Batteries

Preparation of the Porous Copper Foil Current Collector for High-Performance Lithium-Ion Batteries by Electro-Codeposition: Effect of Stirring Speed

Ag coated 3D-Cu foam as a lithiophilic current collector for enabling Li<sub>2</sub>S-based anode-free batteries

Lithiophilic and Anticorrosive Cu Current Collector via Dual-Bonded Porous Polymer Coating for Stable Lithium-Metal Batteries

Organic carbonized copper foil facilitates the performance of current collector for lithium-ion batteries

A self-supported, three-dimensional porous copper film as a current collector for advanced lithium metal batteries

Dynamic Adaptive Porous Cu Current Collector for Low N/P Ratio Li Metal Batteries

Study on the Commercial Metalized Plastic Current Collector PET‐Cu and PP‐Cu Toward High‐Energy Lithium‐Ion Battery

Silica‐Modified 3D Porous Copper Current Collectors Toward Stable Lithium Metal Anodes

Tuning dual three-dimensional porous copper/graphite composite to achieve diversified utilization of copper current collector for lithium storage

A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes