Abstract:Despite remarkable development in high capacity iron oxide-based electrodes for lithium-ion batteries (LIBs), the low mass loading and poor areal capacity still impede their practical applications. In this report, novel FeO nanoarrays were directly constructed on three-dimensional (3D) copper foam current collector (denoted as CFPFeOx NAs) via facile hydrothermal growth followed by a postannealing process. The nanoarrays were stacked by numerous FeO porous nanoblocks, exhibiting a unique hierarchical structure. The loading density of FeO in the CF@FeOx NAs reached 2.S mg cm(-2) owing to the hierarchical structure of the novel 3D nanoarray electrode. When tested as an anode for LIBs, the 3D integrated electrode delivered high areal capacities of 3.33 and 2.61 mAh cm(-2) at 0.25 and 1.25 mA cm(-2), respectively. A high areal capacity of 2.12 mAh cm-2 was retained at 2.5 mA cm(-2) after 500 cycles, which is the best electrochemical performance in terms of areal capacity for the iron oxide-based electrodes reported so far. Even at a higher current density of 12.5 mA cm-2, the areal capacity was still maintained at 0.96 mAh cm(-2), demonstrating good rate capability. A lithium full cell test was also conducted using LiNi0.8Co0.05Al0.15 (NCA) as a cathode and the CF@FeOn NAs as an anode, which exhibited a good areal capacity of 0.94 mAh cm-2 at 2.5 mA cm(-2) after 50 cycles. This work offers a promising pathway to greatly enhance the loading density and areal capacity of metal oxide-based electrodes for electrochemical energy storage.

A flexible porous polyimide/copper composite film toward high-mass-loading anodes in lithium-ion batteries

A facile method to fabricate lightweight copper coated polyimide film current collectors for lithium-ion batteries

Polymer@Cu composite foils with through-hole arrays as lightweight and flexible current collectors for lithium-ion batteries

Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

A self-supported, three-dimensional porous copper film as a current collector for advanced lithium metal batteries

3D Porous Cu-Composites for Stable Li-Metal Battery Anodes

Copper-Coated Porous Polyimide As Ultralight and Safe Current Collectors for Advanced Libs

Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density

Flexible Porous Silicon/Carbon Fiber Anode for High−Performance Lithium−Ion Batteries

Porous Cu Film Enables Thick Slurry-Cast Anodes with Enhanced Charge Transfer Efficiency for High-Performance Li-Ion Batteries

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

Three-Dimensional Porous Nano-Ni/Fe3o4 Composite Film: Enhanced Electrochemical Performance For Lithium-Ion Batteries

A Rigid-Flexible Protecting Film with Surface Pits Structure for Dendrite-Free and High-Performance Lithium Metal Anode

Porous Insulating Matrix for Lithium Metal Anode with Long Cycling Stability and High Power

Scalable synthesis of a porous structure silicon/carbon composite decorated with copper as an anode for lithium ion batteries

Smart construction of polyaniline shell on Fe2O3 as enabling high performance anode toward flexible lithium-ion battery

Three-dimensional porous polyimide anode for high-rate lithium ion batteries

3D Copper Foam@FeOx Nanoarrays As a High Areal Capacity and Stable Electrode for Lithium-Ion Batteries

A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes

Three-dimensional flower-like NiO on Cu foam as a lithiophilic current collector for high-performance lithium metal batteries

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile