Abstract:Fast charging is critical for the efficient storage of energy in devices like electric vehicles and portable electronics. The rate performance of electrodes is limited by the electron transfer rate, the ohmic resistance of the electrode, the size and shape of the primary electrode particles, and the charge carrier diffusion process within the electrodes. However, separating the intrinsic contributions of mass transport and charge transfer from non-equilibrium data obtained under large interfacial polarization is very complex, which limits our understanding of high rate electrodes during charging and discharging. While it is possible to extract the diffusive and capacitive components of an electrode’s capacity from cyclic voltammetry (CV) data using the Dunn method, the Dunn model assumes a constant diffusional overpotential. In reality the ohmic resistance scales with the current, so that the ohmic potential drop across the electrode cannot be neglected a priori for fast charging electrodes in which high current densities are a requirement. We recently developed a new model based on the Butler-Volmer equation for the kinetics of the electron exchange process, and incorporated the charge carrier diffusion process and the internal ohmic losses, as well as the effect of the shape and dimensions of the primary electrode particles on the effective diffusion rate [1]. The model can provide the relation between current peak voltages and peak currents from a series of sweep rate CV measurements. The ohmic resistance, equilibrium voltage, exchange current (related to the electrochemical reaction rate) and limiting current (related to the charge carrier diffusion coefficient and Nernst diffusion layer thickness) can be extracted as independent variables from the fitted experimental data. By simulating a range of different high rate Li electrode materials (both cathodes and anodes), we identified influence of the reaction rate on the overpotential as a common significant factor, which explains the nonlinear relation between the potential and the current at peak position in different CV measurements. Our analysis suggests that a higher electrochemical reaction rate seems to be more important for the realization of faster charging batteries than a larger carrier diffusion coefficient. Finally, our extended model also enables us to predict the overpotential at any applied potential, which is not possible with other current models known till date. This insight helps us to gain more detailed understanding of the relationship between the intrinsic properties of the electrode materials and their rate performance in different reaction stages. This may facilitate further modification of electrode material towards enhanced high rate performance in next-generation batteries. [1] R. Xia et al., Energy Storage Mater. 53 (2022) 381-390.

Revisiting Diffusion-Limited C-rate Through Simulation: Formulation Revision and Mechanism Digging

Diffusion-limited C-rate: A criterion of rate performance for lithium-ion batteries

C-rate related diffusion process of the graphite electrode by in situ experiment and analysis

Diffusion‐Limited C‐Rate: A Fundamental Principle Quantifying the Intrinsic Limits of Li‐Ion Batteries

Diffusion-limited C-rate as a physics-based constraint to accelerate automated design for lithium-ion batteries

Revealing the Rate-Limiting Li-Ion Diffusion Pathway in Ultrathick Electrodes for Li-Ion Batteries.

Asymmetric Rate Behavior of Si Anodes for Lithium‐Ion Batteries: Ultrafast De‐Lithiation versus Sluggish Lithiation at High Current Densities

Electro-chemo-mechanical behavior of lithium-ion battery electrodes

Analysis of Rate-Limiting Factors in Thick Electrodes for Electric Vehicle Applications

Diffusion Limited Current Density: A Watershed in Electrodeposition of Lithium Metal Anode

Electrode microstructure design based on a CA-FD hybrid computation framework to alleviate the concentration polarization

Simulation of bi-layer cathode materials with experimentally validated parameters to improve ion diffusion and discharge capacity

Decoupling Reaction, Diffusion and Ohmic Processes in Fast-Charging Electrodes: A New Model for CV Data Analysis

Surface‐like diffusion of fast ions in framework energy materials for Li‐ and Na‐ion batteries

A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation

A Diffusion‐‐Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium‐Metal Batteries

Influence of Finite Diffusion on Cation Insertion-Coupled Electron Transfer Kinetics in Thin Film Electrodes

Multiscale Modification of Graphdiyne-based Electrodes and Diffusion Kinetics Analysis of Lithium Ions

Multiscale computational fluid dynamics modelling of spatial ALD on porous li-ion battery electrodes

Modeling of Coupling Between Free Volume Evolution and Diffusion in Silicon Electrodes of Lithium-Ion Batteries

Simulation study of rate limiting factors of Li-ion batteries using experimental functions of electronic and ionic resistances