Abstract:Robots with openness and flexibility have attracted a large number of researchers to conduct in-depth studies in the field of surface machining. However, there is a redundant degree of freedom (DOF) in 6-DOF robot machining: when a ball end milling cutter is used to process curved parts, the tool point needs to strictly follow the planned milling trajectory, but the tool axis vector only needs to be within a certain range. During the machining process, the rotation of the tool around its axis is not constrained. Therefore, it is necessary to optimize the redundant DOF. Aiming at the redundant DOF of the tool axis vector in ball end milling for surface parts, a Redundancy Optimization strategy for Minimum Joint trajectory (ROMJ) is proposed. It takes the shortest trajectory of robot joints as the optimization objective, and the numerical optimization method is adopted to carry out the optimal design of tool axis vector trajectory in the milling process. Before optimization, to decrease the data volume, the number of track points is sampled and adjusted based on curve characterization errors. In the optimization process, considering the obvious difference in the load quality characteristics of the robot joints, a Redundancy Optimization strategy for Minimum Joint trajectory considering the different Load of joints (ROMJ-L) is proposed. The load difference coefficients of each joint are introduced into the optimization objective of the trajectory of robot joints. By using this method, the optimal design of each joint trajectory of the robot is realized. In order to verify the methods proposed in this paper, a comparison experiment is carried out. The results show that under the same tool point trajectory, the proposed methods can significantly reduce the robot joint trajectory, and the joint trajectory is influenced by the load difference of each joint. Finally, an Eflin-10 robot is used to process the butterfly trajectory tool path by the trajectory planned by the ROMJ-L method, and the results show that the method is practical.

Constant Load Toolpath Planning and Stiffness Matching Optimization in Robotic Surface Milling

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Continuous Stiffness Optimization of Mobile Robot in Automated Fiber Placement

Region-based toolpath generation for robotic milling of freeform surfaces with stiffness optimization

Optimization of Robot Posture and Workpiece Setup in Robotic Milling with Stiffness Threshold

Tool Posture Optimization Subjected to the Rigidity of Multi-Axis Machine Tool

Tool orientation and redundancy integrated planning method constrained by stiffness for robotic machining of freeform surfaces

Profile Error-Oriented Optimization of the Feed Direction and Posture of the End-Effector in Robotic Free-Form Milling

Ball-End Cutting Tool Posture Optimization for Robot Surface Milling Considering Different Joint Load

Posture Optimization in Robotic Machining Based on Comprehensive Deformation Index Considering Spindle Weight and Cutting Force

Posture Optimization in Robotic Flat-End Milling Based on Sequential Quadratic Programming

Toolpath Generation for Robotic Flank Milling Via Smoothness and Stiffness Optimization.

A novel surface topography prediction method for hybrid robot milling considering the dynamic displacement of end effector

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Dynamic Response Analysis of a Ball-End Milling Cutter and Optimization of the Machining Parameters for a Ruled Surface

Spatial Path Planning for Robotic Milling of Automotive Casting Components Based on Optimal Machining Posture

Pose Optimization in Robotic Milling Based on Surface Location Error

Stiffness performance index based posture and feed orientation optimization in robotic milling process

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

A Novel Approach to Robotic Grinding Guaranteeing Profile Accuracy Using Rigid-Flexible Coupling Force Control for Free-Formed Surfaces

Surface Morphology, Burr Formation, and Spindle Axial Drift in High-Speed Robotic Milling of Complex Features