Abstract:In situ compressive behavior of carbon fibers reinforced PPS laminates. This study investigates the influence of a combined thermal heat flux (imposed by a cone calorimeter) and a compressive loading on the deformation and damage mechanisms within quasi‐isotropic carbon fibers reinforced thermoplastic (polyetherether ketone [PEEK] and polyphenylene sulfide [PPS]) and thermosetting (epoxy) laminates. First, thermogravimetric Analyses conducted under nitrogen provide valuable information on the thermal decomposition of these materials depending on the matrix nature (580–510°C and 350°C, respectively) which is a key factor to explain the mechanical behavior under fire conditions. Second, under the same testing conditions (creep loading under a 50 kW/m2 heat flux), the time to failure is about 17 times as high (C/PEEK), twice as high (C/PPS) with respect to C/epoxy laminates. At the ply scale, the exposure of thermoplastic matrices (PEEK and PPS) to a 50 kW/m2 heat flux causes softening and thermal decomposition, facilitating the micro‐buckling of fiber bundles in matrix‐rich areas. At the laminates scale, this mechanism ultimately leads to the formation and propagation of plastic kink bands in the transverse direction. In epoxy‐based laminates, the onset of matrix pyrolysis occurs at lower temperatures (350°C) during thermal aggression, and thermal decomposition has started in all the plies of the laminates. Combined with the low ductility of the epoxy matrix, the compressive response is elastic‐brittle and results from the buckling of 0° plies outside the thermally‐damaged area. Highlights Study on the compression of polymer composites exposed to a 50 kW/m2 heat flux. The influence of the matrix nature (thermoplastic vs thermoset) is discussed. Time to failure is about 17 times higher in C/PEEK compared to C/Epoxy. Plastic kink bands propagate in thermoplastic composites at T > Tg. C/Epoxy laminates undergo buckling outside the thermally damaged area.

Ablation Mechanism and Tensile Progressive Failure of Carbon/Phenolic 2.5d Woven Composites with Dense and Lightweight Matrix

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Tensile‐after‐ablation progressive damage and the failure mechanism of 2.5D woven composites with crack pores

Evaluation of Interfacial Properties of Atmospheric Pressure Plasma-Treated Cnt-Phenolic Composites by Dual Matrix Fragmentation and Acoustic Emission Tests

Ablation and mechanical behaviour of C/C composites under an oxyacetylene flame and tensile loading environment

3D needle-punched carbon/quartz fabric reinforced nanoporous phenolic composites with co-optimized mechanics, insulation and ablation

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Damage development in woven carbon fibre thermoplastic laminates with PPS and PEEK matrices: A comparative study

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Enhanced ablation resistance of carbon/phenolic composites based on mesophase pitch reinforced particles

Sublimation and oxidation zone ablation behavior of carbon/carbon composites

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

2.5D quartz fabric reinforced nanoporous phenolic composites with weakened heat transfer and optimized mechanical properties

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Fracture toughness and progressive damage mechanisms of 2.5D woven SiCf/SiC composites