Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Sensitivity-based Structural Damage Identification Via Response Reconstruction

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading

Structural Damage Identification Based on Transmissibility in Time Domain

Damage Identification Method Based on Structural Dynamic Characteristics and Strain Measurements

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural damage identification based on structural sensitivity analysis and sparse restrains optimization

Structural damage identification using system dynamic properties

Damage Identification of Long-Span Bridges Based on the Correlation of Monitored Global Dynamic Responses in High Dimensional Space

Structural Damage Identification Based on Substructure Sensitivity and L 1 Sparse Regularization

Damage detection method for structures based on the relative variation of wavelet total energy

Structural damage identification using static test data and changes in frequencies

Substructure Isolation and Damage Identification Using Free Responses

Damage Identification of Long-Span Bridges Based on the Correlation of Probability Distribution of Monitored Quasi-Static Responses

On the effectiveness of sparse regularization for structural damage diagnosis using dynamic strain measurements

Sparse representation for damage identification of structural systems

Solution to the problem of bridge structure damage identification by a response surface method and an imperialist competitive algorithm

Bridge damage detection from the equivalent damage load by multitype measurements

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

Research on damage identification of simply supported bridge based on effect size method for vehicle-bridge coupled vibration

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

Structural damage detection based on cross-correlation function with data fusion of various dynamic measurements