Abstract:High precision fiber-optic gyroscopes (FOGs) interrogated with broadband light have angular random walk (ARW) limited by the source relative intensity noise (RIN). A passive fiber ring resonator (passive FRR) reduces the RIN and improves the ARW, but the low power transmission results in a low signal-to-noise ratio at the detection. For a great ARW improvement, the fiber ring resonator should have not only a great RIN reduction but also a large power transmission. An erbium-doped fiber amplifier (EDFA) is inserted in the passive resonator to construct an active fiber ring resonator (active FRR). The EDFA compensates for the loss of the resonator and leads to a high finesse and a greater reduction in the RIN. The coupling ratios of the couplers in the active FRR are both 50%-50% tap. By adjusting the EDFA gain properly, a 17-dB decrease in the RIN is demonstrated, which reduces the standard deviation by 8.5 dB. Adding the active FRR between the Sagnac interferometer and the broadband light, the detected power reaches 150 mu W with the FOG at rest and without modulation, which is about one hundred times of the detected power when using a passive FRR. The phase noise is reduced by 6 dB at the proper frequency. The ARW is improved by 4.9 dB from 1.40 to 0.45 mdeg/hour(1/2). (C) 2019 Optical Society of America

White-light-driven Resonant Fiber-Optic Gyro Achieving Navigation-Grade Resolution

Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

White-light-driven Resonant Fiber-Optic Gyro Based on Round Trip Filtering Scheme.

A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator.

Angular Random Walk Improvement of a Fiber-Optic Gyroscope Using an Active Fiber Ring Resonator

Laser Frequency Noise Measurement in a Resonant Fiber Optic Gyro

Research Progress of the Resonant Fiber Optic Gyroscope Technology

Performance of a Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Resonator Fiber Optic Gyro Employing a Semiconductor Laser.

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Resonant Fiber Optical Gyroscope Using the Single-Mode Fiber Ring Resonator.

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

Reduction of relative intensity noise in a broadband source-driven RFOG using a high-frequency modulation technique

Receng Progress on Resonator Fiber Optic Gyro

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Laser Frequency Noise Power Spectral Density Measurement Technology and Its Application to Resonant Optical Fiber Gyroscope

Digital Resonator Fiber Optic Gyro Based on A Miniature Laser Source

Navigation-grade Resonant-Fiber Optic Gyroscope with a Broadband Source

Suppressing Backscattering Noise of a Resonant Fiber Optic Gyroscope Using Coherent Detection.

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique