Photonic Bandgap Fiber Microlaser for Optofluidic Sensing and Tagging

Yanqiong Wang,Chaoyang Gong,Xi Yang,Yiling Liu,Lei Wei,Yun-Jiang Rao,Yuan Gong

DOI: https://doi.org/10.1364/ofs.2022.f2.2

2022-01-01

Abstract:We report hollow-core photonic bandgap fiber microlasers that integrate the functions of sensitive biodetection (limit of detection 0.06 ng/μL) and mass tagging (encoding capacity > 22500), applicable to mass screening scenarios.

What problem does this paper attempt to address?

Photonic Bandgap Fiber Microlaser with Dual‐Band Emission for Integrated Optical Tagging and Sensing

Yanqiong Wang,Chaoyang Gong,Xi Yang,Tao Zhu,Ke Zhang,Yun‐Jiang Rao,Lei Wei,Yuan Gong

DOI: https://doi.org/10.1002/lpor.202200834

2023-03-12

Abstract:An optofluidic microlaser with a unique dual‐band emission is realized by using a photonic bandgap fiber. The periodic resonances in one band are used for immunosensing of microalbumin, while the location‐dependent random resonances in another band generate a 2D laser tag. The photonic bandgap fiber microlaser integrates dual functions of high‐capacity tagging and biosensing with promising applications in disease screening. Lasers are emerging as novel photonic tags for single‐cell labeling, anticounterfeiting, and encryption technology due to their narrow linewidth, high spectral multiplexing capacity, and superior stimuli‐responsiveness. These laser‐encoded photonic tags mostly distinguish the heterogeneity but do not yet provide both tagging and sensing of biosamples, which is highly desirable for disease screening. Here, a photonic bandgap (PBG) fiber microlaser that works as a 2D tag and an immunosensor is developed. The tubular PBG structure allows strong light–matter interaction and supports dual‐band lasing in the same optical fiber, enabling massive biosample tagging and sensitive biodetection. By encoding the random resonant peaks in the short‐wave band and multiplexing in the spatial domain, a 2D laser tag is generated with a large encoding capacity (>28500). Immunosensing of microalbumin is realized by using the periodic resonant peaks in the long‐wave band, and a limit of detection of 0.06 ng μL−1 is achieved. This work is inspiring for the development of high‐performance, multifunctional integrated devices for disease screening.
High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Xiaoqin Wu,Yipei Wang,Qiushu Chen,Yu-Cheng Chen,Xuzhou Li,Limin Tong,Xudong Fan

DOI: https://doi.org/10.1364/prj.7.000050

IF: 7.6

2019-01-01

Photonics Research

Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.
Fiber Optofluidic Microlaser with Lateral Single Mode Emission

Chao-Yang Gong,Yuan Gong,Wei-Li Zhang,Yu Wu,Yun-Jiang Rao,Gang-Ding Peng,Xudong Fan

DOI: https://doi.org/10.1109/jstqe.2017.2712622

IF: 4.9

2018-01-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:We report a low threshold fiber optofluidic microlaser, based on a microstructured optical fiber (MOF). The particular MOF structure is used not only as the microfluidic channel for sampling the liquid gain, but also as a spectral filter to achieve the single mode emission. Lateral laser emission from the MOF is observed when 1 mM Rhodamine 6G in ethanol is sucked into the MOF by the capillary force and pumped with a pulsed laser. It requires a low volume, similar to 470 pL, of the gain materials. Single mode emission with a full width at half-maximum (FWHM) of 53 pm is obtained with a threshold of 13.2 mu J/mm(2). The filtering effect is investigated both experimentally and theoretically by the interference within the cavity. The dependence of the number of modes on the lateral position of the pump with respect to the MOF is also discussed By using the single mode emission, it is promising for the multiplexing of optofluidic lasers in the spectral domain.
Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Jinyan Song,Lei Wang,Lei Jin,Xiang Xia,Qingli Kou,Sophie Bouchoule,Jian-Jun He

DOI: https://doi.org/10.1109/jlt.2012.2209401

IF: 4.7

2012-01-01

Journal of Lightwave Technology

Abstract:A highly sensitive integrated optical biosensor based on the cascade of a Fabry-Perot cavity laser and a microring resonator is investigated theoretically and experimentally. The free spectral ranges of the microring and the laser cavity are designed to be about the same in order to apply intensity interrogation. The variation of the refractive index of the fluidic sample results in a large shift in the envelope function of the total transmission spectrum of the sensor, and consequently, a large change in the transmitted power. The simple light-source-integrated sensing scheme achieved a high sensitivity of 1000 dB/RIU in the preliminary experiment, demonstrating its principle and potential for low-cost practical applications.
Femtosecond Laser Micromachining of Microfluidic Fiber Sensors

Changrui Liao,Lei Xu,Zhengyong Li,Feng Zhu,Tianhang Yang,Kuikui Guo,Yiping Wang

DOI: https://doi.org/10.1109/icocn.2016.7875603

2016-01-01

Abstract:Migration of lab-on-chip configurations into the optical fiber platform opens the revolutionary prospect of labin-fiber systems on the basis of an efficient optical transport highway for multifunctional sensing. In this paper, three-dimensional microfluidic channels patterning inside the fiber by femtosecond laser ablation, femtosecond laser assisted splicing and selective chemical etching will be introduced in terms of machining mechanism and accuracy. In these approaches, we have successfully achieved phase-shifted FBG sensor based on in-grating bubble and several in-fiber cavity based interferometric sensors and also preliminarily explore their applications in biochemical analysis.
In-fiber Optofluidic Michelson Interferometer for Detecting Small Volume and Low Concentration Chemicals with a Fiber Ring Cavity Laser

Xu-guang Hu,Yong Zhao,Yun Peng,Rui-jie Tong,Hong-kun Zheng,Jian Zhao,Sheng Hu

DOI: https://doi.org/10.1016/j.snb.2022.132467

IF: 9.221

2022-01-01

Sensors and Actuators B Chemical

Abstract:An in-fiber optofluidic Michelson interferometer fabricated by femtosecond laser micromachining technology was presented. The interferometer structure was prepared by a special optical fiber with two cores and a microchannel. One core was connected to the core of a single-mode fiber (SMF) and functioned as a sensing arm on the microchannel inner wall, the other core worked as a reference arm and was connected to the optical waveguide introduced by femtosecond laser processing. By combining with a ring cavity laser, the detection limit (DL) of the interferometer could be improved. The laser sensor presented a high linear response with a refractive index (RI) sensitivity of 1039.77 nm/RIU and the calculated DL could reach as low as 1.675 x 10(-5) RIU. Then, the sensor measured different concentrations of vitamin C in tablets in the concentration range of 0-10 mg/mL with a detection limit of 0.06 mg/mL. Due to the advantages of optofluidic structure, the volume of the detection solution could be as low as few tens of nanoliters, and the time to replace and detect the solution only took a few seconds. In addition, the laser sensor realized label-free DNA hybridization detection through surface func-tionalization, and could detect 1 mu M target DNA solution with high specificity. This sensing device had great potential for small volume and low concentration sample detection in the biochemical field.
Micro-cavity fabricated by femtosecond lasers and its application in fiber-loop ring-down spectroscopy

Qi Zhang,张伟刚 Zhang Weigang,张健 Zhang Jian,刘卓琳 Liu Zhuolin,姜萌 Jiang Meng,Yaping Liu,林锦海 Lin Jinhai

DOI: https://doi.org/10.3788/CJL20093603.0713

2009-01-01

Abstract:In order to realize the sensing probe of micro-scale liquid and gas in fiber cavity ring-down spectroscopy system, a new method of fabricating microfluidic sensing devices is proposed. The micro-cavity on single mode 980 nm and 1550 nm fibers by direct writing is achieved with a focused near-IR 800 nm femtosecond laser beam. The width of the cavity is 4 μm, with the depth of 80 μm. The micro cavity directly written by femtosecond laser is successfully applied into fiber-loop ring-down (FLRD) spectroscopy, and its detection principle is analyzed. It is used in micro-cavity liquid absorb detection, and the relation between the detected ring-down time, the loss and the liquid concentration is deduced. With this micro-cavity, FLRD spectroscopy can realize gas and fluidic absorption measurement on micro-scale.
Lasing-Encoded Microsensor Driven by Interfacial Cavity Resonance Energy Transfer

Zhiyi Yuan,Ziyihui Wang,Peng Guan,Xiaoqin Wu,Yu-Cheng Chen

DOI: https://doi.org/10.1002/adom.201901596

IF: 9

2020-01-01

Advanced Optical Materials

Abstract:Microlasers are emerging tools for biomedical applications. In particular, whispering-gallery-mode (WGM) microlasers are promising candidates for sensing at the biointerface owing to their high quality-factor and potential in molecular assays, and intracellular and extracellular detection. However, lasing particles with sensing functionality remain challenging since the overlap between the WGM optical mode and external gain medium is much lower compared to internal gain inside the cavity. To overcome this problem, the concept of Forster resonant energy transfer (FRET) is exploited on WGM droplet microlaser by separating donor and acceptor molecules at the cavity-surface interface. It is first discovered that the interfacial FRET laser not only originates from conventional FRET but utilizes coherent radiative energy transfer (CRET) to excite acceptor molecules by inducing light-harvesting effect near the cavity interface. Simulations and experiments have revealed that the absorption spectrum of individual analyte plays a crucial role in interfacial FRET laser. Distinct lasing spectra can therefore distinguish molecules of different absorption properties upon binding. Finally, detection of small fluorescent molecules and photosynthetic protein is performed. The results presented here not only demonstrate the wide-ranging potential of microlaser external cavity implementation in molecular sensing applications, but also provide comprehensive insights into cavity energy transfer in laser physics.
All-in-fiber optofluidic sensor fabricated by femtosecond laser assisted chemical etching.

Lei Yuan,Jie Huang,Xinwei Lan,Hanzheng Wang,Lan Jiang,Hai Xiao

DOI: https://doi.org/10.1364/OL.39.002358

IF: 3.6

2014-01-01

Optics Letters

Abstract:An all-in-fiber prototype optofluidic device was fabricated by femtosecond laser irradiation and subsequent selective chemical wet etching. Horizontal and vertical microchannels can be flexibly created into an optical fiber to form a fluidic cavity with inlets/outlets. The fluidic cavity also functions as an optical Fabry-Perot cavity in which the filled liquid can be probed. The assembly-free microdevice exhibited a fringe visibility of 20 dB and was demonstrated for measurement of the refractive index of the filling liquids. The proposed all-in-fiber optofluidic micro device is attractive for chemical and biomedical sensing because it is flexible in design, simple to fabricate, mechanically robust, and miniaturized in size. (C) 2014 Optical Society of America
A Fiber Optic Biosensor Detecting System of Laser-Processed Micro Channels

Zhong-chen Bai,Shui-jie Qin,Xin Zhang,Zimi Zhang

2009-01-01

Abstract:With the development of micromachining technology, smart micro sensors have been a very potential technology. A novel fiber optic biosensor and it's detecting system are designed in the paper. Micro-flow patch of the fiber optic biosensor is fabricated by high power laser on PMMA material. The probe of cone surface is fabricated by chemical etching method on mutilmode fiber. The probe of molecular recognition is engraved by high power laser on the probe of cone surface. ZnSe nano crystal cluster marking with glucose molecules is used for verifying feasibility of the fiber optic biosensor. It is shown that Tapered angle of the probe of fluorescence received affected the experimental results. Tapered angle of the probe Of fluorescence received depends on chemical, etching time. Microchannels can solve center aim of the two the probe of molecular recognition and fluorescence received. When concentration of detecting sample is brought down, fluorescence of individualistic cluster will become remarkable in 80 mu m microchannels.
Tunable Optofluidic Microring Laser Based on a Tapered Hollow Core Microstructured Optical Fiber.

Li,Wen-Yuan Zhou,Ming-Ming Luo,Yan-Ge Liu,Jian-Guo Tian

DOI: https://doi.org/10.1364/oe.23.010413

IF: 3.8

2015-01-01

Optics Express

Abstract:A tunable optofluidic microring dye laser within a tapered hollow core microstructured optical fiber was demonstrated. The fiber core was filled with a microfluidic gain medium plug and axially pumped by a nanosecond pulse laser at 532 nm. Strong radial emission and low-threshold lasing (16 nJ/pulse) were achieved. Lasing was achieved around the surface of the microfluidic plug. Laser emission was tuned by changing the liquid surface location along the tapered fiber. The possibility of developing a tunable laser within the tapered simplified hollow core microstructured optical fiber presents opportunities for developing liquid surface position sensors and biomedical analysis.
Polymer-Coated Hollow Fiber Optofluidic Laser for Refractive Index Sensing

Xuhao Zhao,Ying Wang,Changrui Liao,Gang-Ding Peng,Yuan Gong,Yiping Wang

DOI: https://doi.org/10.1109/jlt.2019.2953137

IF: 4.7

2020-01-01

Journal of Lightwave Technology

Abstract:Optofluidic laser is an emerging method for biochemical sensing. The topic on, which kind of structure is the best to integrate the laser resonator and microfluidic channel, is worth to be explored. Here, we report a hollow optical fiber optofluidic laser based on a dye-doped polymer film. This fiber microstructure is a promising candidate that serves both as a laser microresonator and a compact microfluidic channel. The refractive index of the polymer film is higher than silica so that the whispering gallery mode can be supported. The coating process is explored in detail. The laser spectra and threshold properties of the HOF microlaser are investigated. The dye-doped polymer film can be controlled to be as thin as 1.6 μm and a threshold of below 1 μJ/mm2 can be reached. Thanks to the strong light-liquid interaction enabled by the polymer coating on the inner interface of HOF, sensitive refractive index detection is demonstrated by monitoring the laser wavelength shift, which has the potential for wavelength division multiplexing. This laser sensor is promising for label-free biochemical detection.
Advances of Optofluidic Microcavities for Microlasers and Biosensors

Zhiqing Feng,Lan Bai

DOI: https://doi.org/10.3390/mi9030122

2018-03-09

Abstract:Optofluidic microcavities with high Q factor have made rapid progress in recent years by using various micro-structures. On one hand, they are applied to microfluidic lasers with low excitation thresholds. On the other hand, they inspire the innovation of new biosensing devices with excellent performance. In this article, the recent advances in the microlaser research and the biochemical sensing field will be reviewed. The former will be categorized based on the structures of optical resonant cavities such as the Fabry⁻Pérot cavity and whispering gallery mode, and the latter will be classified based on the working principles into active sensors and passive sensors. Moreover, the difficulty of single-chip integration and recent endeavors will be briefly discussed.
Reproducible fiber optofluidic laser for disposable and array applications.

Chaoyang Gong,Yuan Gong,Qiushu Chen,Yun-Jiang Rao,Gang-Ding Peng,Xudong Fan

DOI: https://doi.org/10.1039/c7lc00708f

IF: 7.517

2017-01-01

Lab on a Chip

Abstract:Disposable sensors are widely used in biomedical detection due to their inherent safety, ease of use and low cost. An optofluidic laser is a sensitive bioassay platform; however, demonstrating its fabrication cheaply and reproducibly enough for disposable use has been challenging. Here, we report a low-cost, reproducible fiber optofluidic laser (FOFL) using a microstructured optical fiber (MOF). The MOF not only supports the whispering gallery modes for lasing but also serves as a microfluidic channel for sampling the liquid gain medium via capillary force. Because of the precise control of its geometry (δ < 0.4%) during the fiber-drawing process, good reproducibility in laser intensity (δ = 6.5%) was demonstrated by changing 10 sections of the MOF. The strong coupling between the in-fiber resonator and gain medium enables a low threshold of 3.2 μJ mm-2. The angular dependence of the laser emission was observed experimentally and analyzed with numerical simulations. An array of the FOFLs was also demonstrated. This technology has great potential for low-cost bioassay applications.
Flying Particle Microlaser and Temperature Sensor in Hollow-Core Photonic Crystal Fiber

Richard Zeltner,Riccardo Pennetta,Shangran Xie,Philip St.J. Russell

DOI: https://doi.org/10.1364/OL.43.001479

2017-10-06

Abstract:Whispering-gallery mode (WGM) resonators combine small optical mode volumes with narrow resonance linewidths, making them exciting platforms for a variety of applications. Here we report a flying WGM microlaser, realized by optically trapping a dye-doped microparticle within a liquid-filled hollow-core photonic crystal fiber (HC-PCF) using a CW laser and then pumping it with a pulsed excitation laser whose wavelength matches the absorption band of the dye. The laser emits into core-guided modes that can be detected at the endfaces of the HC-PCF. Using radiation forces, the microlaser can be freely propelled along the HC-PCF over multi-cm distances - orders of magnitude further than in previous experiments where tweezers and fiber traps were used. The system can be used to measure temperature with high spatial resolution, by exploiting the temperature-dependent frequency shift of the lasing modes, and also for precise delivery of light to remote locations.

Optics,Applied Physics
Sub-molecular-layer Level Protein Detection Using Disposable Fiber Optofluidic Laser

Chaoyang Gong,Yuan Gong,Xi Yang,Yun-Jiang Rao

DOI: https://doi.org/10.1364/ofs.2018.fb4

2018-01-01

Abstract:Disposable fiber optofluidic laser with sub-layer gain molecule is developed. The molecule surface density is two orders of magnitude less than state of the art. Detection of biomolecules on the order of 10−17 mol is demonstrated.
Intracavity Dynamics-Based Gain-Assisted Sensing with Microtubule Raman Microlaser

Mingfang Li,Zongren Dai,Mingwang Tian,Yidong Tan

DOI: https://doi.org/10.1063/5.0158302

IF: 5.6

2023-01-01

APL Photonics

Abstract:Microcavity lasers show excellent performance as a miniaturized microsensor in various applications. However, their relatively weak power may be easily submerged in system noises and disturbed by environmental fluctuations, rendering them ineffective at detecting small signals for precise sensing. To solve this problem, the laser differential frequency-shift feedback technique is demonstrated in a microtubule Raman laser to achieve the optical gain assistance. When the microlaser is frequency-shift-modulated and returns back to the resonator, the measurement signal can resonate with the laser relaxation oscillation and be significantly enhanced. The intracavity dynamics-based enhancement makes it effective for increasing intensity changes caused by analytes. Small signals that would otherwise be buried in system noises and go undetected can be more easily resolved. In addition, the microsensor reduces the spectral measurement range and offers a way to observe the fast dynamic response. Based on that, a measurement resolution of 50 nm nanoparticle detection limit and a refractive index noise-limited resolution of 8.18 × 10−7 refractive index unit (RIU) are demonstrated. The dynamic phase transition of thermosensitive hydrogel is further investigated as a validation of its rapid detection capability. Integrated with an inherent microfluidic channel, the proposed microsensor provides a direct interaction between analytes and probe light with ultrasmall sample consumption down to 50 pl. It is expected to boost the detection of weak signals in microlasers and enlighten the development of optofluidic microsensors in exploring diverse biochemical processes.
Recent Progress in Fiber Optofluidic Lasing and Sensing

Yang Xi,Nanyang Technological University,Liu Yiling,Research Center for Optical Fiber Sensing, Zhejiang Laboratory,Smietana Mateusz,Gong Yuan

DOI: https://doi.org/10.1007/s13320-021-0622-9

IF: 2.814

2021-01-01

Photonic Sensors

Abstract:Fiber optofluidic laser (FOFL) integrates optical fiber microcavity and microfluidic channel and provides many unique advantages for sensing applications. FOFLs not only inherit the advantages of lasers such as high sensitivity, high signal-to-noise ratio, and narrow linewidth, but also hold the unique features of optical fiber, including ease of integration, high repeatability, and low cost. With the development of new fiber structures and fabrication technologies, FOFLs become an important branch of optical fiber sensors, especially for application in biochemical detection. In this paper, the recent progress on FOFL is reviewed. We focuse mainly on the optical fiber resonators, gain medium, and the emerging sensing applications. The prospects for FOFL are also discussed. We believe that the FOFL sensor provides a promising technology for biomedical analysis and environmental monitoring.
A Novel Fiber Optic Biosensor Based on Microchannels Fabricated Laser

BAI Zhong-chen,JIANG Chong-jie,QIN Shui-jie,LI Jing,ZHANG Xin

DOI: https://doi.org/10.3321/j.issn:1005-0086.2009.05.010

2009-01-01

Abstract:A novel fiber optic biosensor is designed and theoretically analyzed in this paper.Nd:YAG laser(wavelength 1 064 nm) is used for processing complex micron channels of micro flow path of fiber optic biosensors on PMMA substrate.Chemical etching methods is used as fabricating the probe of molecular recognition and fluorescent receiving on multimode optical fiber.Fiber optic biosensors are assembled by micro flow path and the probe of molecular recognition and fluorescent receiving.Relation between trapper angle and minimal fluorescent incident angle of the probe of fluorescent receiving is theoretically analyzed.Several reasons are why round fluorescence intensity of the probe of molecular recognition and fluorescent receiving is different are experimentally analyzed.The results indicate that fiber optic biosensors is theoretically and experimentally is feasible.Main factors of influencing fluorescent receiving depend on trapper angle of fluorescent receiving and the center alignment of the probe of molecular recognition and fluorescent receiving.At the same tome,when solution concentration is reduced,fluorescence of single molecule becomes remarkable.

Photonic Bandgap Fiber Microlaser for Optofluidic Sensing and Tagging

Photonic Bandgap Fiber Microlaser with Dual‐Band Emission for Integrated Optical Tagging and Sensing

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Fiber Optofluidic Microlaser with Lateral Single Mode Emission

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Femtosecond Laser Micromachining of Microfluidic Fiber Sensors

In-fiber Optofluidic Michelson Interferometer for Detecting Small Volume and Low Concentration Chemicals with a Fiber Ring Cavity Laser

Micro-cavity fabricated by femtosecond lasers and its application in fiber-loop ring-down spectroscopy

Lasing-Encoded Microsensor Driven by Interfacial Cavity Resonance Energy Transfer

All-in-fiber optofluidic sensor fabricated by femtosecond laser assisted chemical etching.

A Fiber Optic Biosensor Detecting System of Laser-Processed Micro Channels

Tunable Optofluidic Microring Laser Based on a Tapered Hollow Core Microstructured Optical Fiber.

Polymer-Coated Hollow Fiber Optofluidic Laser for Refractive Index Sensing

Advances of Optofluidic Microcavities for Microlasers and Biosensors

Reproducible fiber optofluidic laser for disposable and array applications.

Flying Particle Microlaser and Temperature Sensor in Hollow-Core Photonic Crystal Fiber

Sub-molecular-layer Level Protein Detection Using Disposable Fiber Optofluidic Laser

Intracavity Dynamics-Based Gain-Assisted Sensing with Microtubule Raman Microlaser

Recent Progress in Fiber Optofluidic Lasing and Sensing

A Novel Fiber Optic Biosensor Based on Microchannels Fabricated Laser