Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental investigation of heat transfer and pressure drop characteristics for vertical downflow using traditional and 3d-printed mini tubes

Experimental and Numerical Studies of Liquid Flow and Heat Transfer in Microtubes

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study and Analysis About Flow and Heat Transfer in Micro-tubes

Experimental Investigation on Heat Transfer Characteristics of Smooth Tube with Downward Flow

Experimental study on influence of microscale effects on liquid flow characteristic in microtubes

Numerical simulation and experiment of laminar heat transfer characteristics in micro-channel collector

A numerical study of microtube geometry effect on flow boiling using the volume of fluid method

Pressure Drop, Heat Transfer and Performance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes

Experimental Study on Flow and Heat Transfer in a 19.6-Μm Microtube

Convection heat transfer of supercritical pressure carbon dioxide in a vertical micro tube from transition to turbulent flow regime

Experimental Research on the Flow and Heat Transfer Characteristics of Subcritical and Supercritical Water in the Vertical Upward Smooth and Rifled Tubes

Experimental Investigation on Flow and Heat Transfer in Rough Microtube

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes

An Investigation on Heat Transfer Characteristics of Different Pressure Steam-Water in Vertical Upward Tube

Experimental and Numerical Investigations on Thermal-Hydraulic Performance of Three-Dimensional Overall Jagged Internal Finned Tubes

Experimental Investigation On Heat Transfer And Frictional Characteristics Of Vertical Upward Rifled Tube In The Advanced Ultra Supercritical Steam Generator

Numerical Simulation of Heat Transfer and Pressure Drop Characteristics of Internal Microfin Tubes

Experimental Study of Single-Phase Pressure Drop and Heat Transfer in a Micro-Fin Tube

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Heat Transfer Performance of Microfin Tubes and -Three-dimensional Heat Transfer Tubes