Identification of bolt state in lap joint based on propagation model and imaging methods of Lamb waves
Tong Tong,Jiadong Hua,Fei Gao,Jing Lin
DOI: https://doi.org/10.1016/j.ymssp.2023.110569
IF: 8.4
2023-10-01
Mechanical Systems and Signal Processing
Abstract:Bolts are commonly applied to lap joints in various industrial fields. Harsh environment, low quality of operation, and other unfavorable conditions may result in bolt looseness. Due to the structural complexity, conventional Lamb wave-based methods just extract statistical characteristics for looseness detection, while neglecting the information contained in the propagation process of Lamb waves. To take full advantage of the information on bolt states carried by array signals during the propagation, this study proposes a detection procedure based on propagation model and imaging methods of Lamb waves. Firstly, the contact status on the macro and micro scales is investigated with theoretical analysis and finite element simulation, and the theoretical model of Lamb wave propagation across bolted joints is established deriving from the analysis of contact. Subsequently, three imaging methods, including delay-and-sum, minimum variance, and sparse reconstruction, are adapted for the identification of bolt state. Since Lamb waves are mainly transmitted into another plate through the contact area near the bolts based on the proposed propagation model, pixel values are inclined to be concentrated around the bolts. On this basis, imaging intensity near each individual bolt can reveal its fastening state given that the transmitted energy around its location is associated with its torque. Finally, experiments are carried out in both single-bolt and double-bolt joints. The proposed propagation model is verified in the single-bolt joint and loose bolts can be identified in the imaging results of the double-bolt joint, which demonstrates the effectiveness of the proposed method for bolt state identification.
engineering, mechanical