Abstract:This work aims to investigate the effects of calcium on the performances of metakaolin-based geopolymer with the aid of a combination of the experiment study and molecular dynamics simulation. These impacts were comprehensively characterized by fresh properties through setting time and consistency of paste with calcium oxide (CaO) partial substitution, while the hardened properties were conducted via compressive strength and elasticity modulus tests. The microstructural characteristics of reaction products were analyzed by X-ray diffraction (XRD), thermogravimetric differential thermal analysis (TG-DTG), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDS), and Brunauer-Emmett-Teller (BET) method. Moreover, various structures of sodium aluminate silicate hydrate (N A S H), calcium aluminate silicate hydrate (C A S H), and five types of geopolymer gels models with increasing calcium content were established and optimized by molecular dynamics simulation. The results showed that the workability of paste decreased with the increase in calcium content, while there was a threshold for mechanical properties at all ages. The products of geopolymer with calcium composite incorporation inclusion were mainly amorphous phases of N(C) A S H containing large amounts of calcite, while even Ca(OH)2 and unreacted CaO could be found in a high-calcium system with higher crystallinity. The coexistence of gels increased compactness and also formed a relatively denser network structure with many mesopores, but poor pore structure caused by unacceptable polymerization degree and bound water consumption of hydration products occurred when the CaO replacement ratio reached 20%. Acceptable agreement between the simulations and experimental results was obtained with a significant decrease in the bond lengths of Si O and Ca O. Overall, the reaction mechanism of calcium in the system was innovatively revealed through the establishment of a macroscopic properties-microstructures-atomic model (multiscale) relationship.

Mechanical Strength and the Degradation Mechanism of Metakaolin Based Geopolymer Mixed with Ordinary Portland Cement and Cured at High Temperature and High Relative Humidity

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

High-temperature Stability of Cementitious Materials Based on Metakaolin

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Effect of Ordinary Portland Cement on Mechanical Properties and Microstructures of Metakaolin-Based Geopolymers.

Metakaolin Based Geopolymer Mortar As Concrete Repairs: Bond Strength and Degradation when Subjected to Aggressive Environments

Effects of Activator Types on Degradation Mechanisms of Metakaolin Geopolymer Mortars Exposed to High Temperature

Effect of Curing Temperature on High-Strength Metakaolin-Based Geopolymer Composite (HMGC) with Quartz Powder and Steel Fibers

Compressive Strength and Chloride Resistance of Slag/Metakaolin-Based Ultra-High-Performance Geopolymer Concrete.

Effects of Different Calcium Sources on Mechanical Properties of Metakaolin Geopolymers

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

The Effects of Phase Changes on the Bonding Property of Geopolymer to Hydrated Cement

Understanding the Influence of Compressive Strength, Microstructure, and Mechanism for Metakaolin-Based Geopolymer under Varying Rest Periods in the Curing Process

Thermal Behavior and Mechanical Properties of Geopolymer Mortar after Exposure to Elevated Temperatures

Experimental Study on the Mechanical Properties and Microstructure of Metakaolin-Based Geopolymer Modified Clay

Mechanical Behaviors of Metakaolin-Based Engineered Geopolymer Composite under Ambient Curing Condition

Workability and mechanical property of metakaolin phosphate acid based geopolymer

Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers

Mechanical Properties and Reaction Kinetics of Alkali-Activated Metakaolin

Thermal stability and microstructure of metakaolin-based geopolymer blended with rice husk ash