Abstract:Thermal barrier coatings (TBCs) are multilayer structures that are critical components in modern gas turbine engines. They enable increased turbine inlet temperatures, reduce cooling requirements and allow life extension of expensive superalloy components in both power and propulsion turbines. TBC is a system comprising of metallic bond coats that provide both adhesion of the ceramic to the substrate and oxidation protection to the superalloy, followed by a thick and compliant ceramic coating principally made of yttria stabilized zirconia. Such two layer TBCs are now pervasive in the industry. Due to sustained thermal exposure as well as extrinsic threats through particle erosion, foreign object damage and infusion of ash and sand, TBC’s undergo mechanical, thermo-mechanical and thermo-chemical changes. As the turbine operation temperatures increase, so do the types of damage mechanisms with concomitant performance challenges. New materials and coating architectures are sought to address these multifunctional requirements but complexities in processing arises. In this presentation, we will introduce the concept of integrating layered materials design and multilayer manufacturing concepts that will enable future TBC systems to concurrently combat various failure mechanisms. Of particular importance in this strategy is that the plasma spray process through its ability to manufacture coatings in layers and enabling optimization properties of these layers during the assembly, will allow novel architectures to be realized. In this paper, we will present examples of a TBC system with optimized through thickness properties achieved via process nuances while also judiciously incorporating new compositions. The results point to a new regime of process enabled design of layered and graded coatings.

Overview of thermal barrier coatings for advanced gas turbine engine

Novel Ceramic Materials for Thermal Barrier Coatings

New Generation Thermal Barrier Coatings for Ultrahigh Temperature Applications

Research Progresses in Materials for Thermal Barrier Coatings

Progress in Thermal Barrier Coatings for Advanced Aeroengines

Al2O3-modified PS-PVD 7YSZ thermal barrier coatings for advanced gas-turbine engines

Novel Thermal Barrier Coatings with Phase Composite Structures for Extreme Environment Applications: Concept, Process, Evaluation and Performance

Oxidation And Hot Corrosion Of Thermal Barrier Coatings (Tbcs)

Research Status and Development Tendency of TBCs Ceramic Materials

Investigation of hot corrosion behavior of thermal barrier coating (TBC) systems with rare earth contents

Progress in the Deposition Mechanisms and Key Performance Evaluation of Thermal Barrier Coatings for Turbine Blades: A Review

Preparation Methods and Ceramic Materials Selection Guideline for Thermal Barrier Coatings

Progress in Thermal Barrier Coatings for Gas Turbine Engines

Progress in ceramic materials and structure design toward advanced thermal barrier coatings

Thermal Barrier Coatings on Nickel Superalloy Substrates

Research Progress of Hot Corrosion-Resistance for Thermal Barrier Coatings

Multilayer Thermal Barrier Coatings: Interplay among Coating Design, Processing and Properties

Multilayer GZ/YSZ Thermal Barrier Coating from Suspension and Solution Precursor Plasma Spray

A Novel Plasma-Sprayed Durable Thermal Barrier Coating with a Well-Bonded YSZ Interlayer Between Porous YSZ and Bond Coat

High Temperature Oxidation and Insulation Behavior of Plasma-Sprayed Nanostructured Thermal Barrier Coatings

Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier Coatings