Abstract:The lengthened ion pathway in restacked 2D materials greatly limits the electrochemical performance of practically dense film electrodes (mass loading >10 mg cm−2). Typical strategies such as the insertion of nanomaterials and 3D‐structure design is expected to reduce the volumetric capacitance of Ti3C2Tx electrodes, diminishing the dominating advantage of Ti3C2Tx over other electrode materials. Here, a novel, facile, and controllable H2SO4 oxidation method is developed for alleviating the restacking issue of Ti3C2Tx film with few electrochemically inactive side‐products such as TiO2. A hierarchical ion path "highway" in Ti3C2Tx film is fabricated with porous structure, atomic‐level increased interlayer spacing, and reduced flake size (through probe‐sonication). As a result, ultra‐high rate performance is obtained with high volumetric capacitance. For a ≈1.1 µm thick Ti3C2Tx film, capacitance retention of 64% is obtained (208 F g−1/756 F cm−3) when the scan rate is increased from 5 to 10,000 mV s−1. Even at higher mass loadings exceeding 12 mg cm−2 (48 µm thickness), the rate capability is still comparable to unoptimized Ti3C2Tx electrodes with low mass loading (1 mg cm−2). Consequently, a high areal capacitance of ≈3.2 F cm−2 is achieved for pathway‐optimized thick Ti3C2Tx film, which is of great significance for practical applications.

Turning Trash into Treasure: Recycling Ti3c2tx Oxide Through Channel Engineering Towards High-Capacity Supercapacitors

Recycling Ti3C2Tx Oxide Nanosheets Through Channel Engineering: Implications for High-Capacity Supercapacitors

Recycling Ti 3 C 2 T x Oxide Nanosheets through Channel Engineering: Implications for High-Capacity Supercapacitors

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

In situ Modified Mesoporous MXene Film with Excellent Oxidation Resistance for High-Performance Supercapacitor

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Fabrication of porous Ti3C2Tx MXene films by in situ foaming strategy for unparalleled high-rate energy storage

Tuning the Pore Size Distribution of Ti3C2Tx Porous Film for High Capacity Supercapacitor Electrode

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Engineering Ti3C2-MXene Surface Composition for Excellent Li+ Storage Performance

Ti3−yNbyC2T MXenes as high-rate and ultra-stable electrode materials for supercapacitors

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Optimizing Ion Pathway in Titanium Carbide MXene for Practical High‐Rate Supercapacitor

Interlayer engineering of Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXenes towards high capacitance supercapacitors

Tuning the pore size distribution of Ti3C2T porous film for high capacity supercapacitor electrode

Hierarchical porous MXene film with diffusion path optimization for supercapacitor

Metal Ion-Induced Porous MXene for All-Solid-State Flexible Supercapacitors

Engineering Chemical-Bonded Ti3C2 MXene@carbon Composite Films with 3D Transportation Channels for Promoting Lithium-Ion Storage in Hybrid Capacitors

Intercalation-deintercalation design in MXenes for high-performance supercapacitors

Construct porous Ti3C2Tx MXenes films by in situ foaming strategy for unparalleled high-rate energy storage