Abstract:The mechanical response of asphalt pavement under vehicular loading is an essential reference for crack-resistant pavement design. However, limited research focuses on the mechanical response measurement of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder. Therefore, two types of asphalt pavements were constructed. The first type of asphalt pavement uses a large-particle-size crushed stone base treated with fly ash and slag powder, where the slag powder uses granulated blast furnace slag powder. The second type uses a conventional cement-stabilized crushed stone base and serves as a reference structure. Firstly, the strain gauges and temperature sensors were installed during the construction of asphalt pavements. Secondly, the mechanical response of the pavement was tested at different speeds and service time conditions. Then, sensitivity analysis and three-factor analysis of variance (ANOVA) were carried out. Finally, the prediction equations were developed. The results show that the longitudinal strain pulse of the asphalt layer exhibited a “compression–tension–compression” characteristic. For the transverse strain pulse of the asphalt layer, the base layer’s transverse and longitudinal strain pulses were only shown as “tensile” characteristics. The vehicular speed significantly affected the strain values for the base and asphalt layers, showing a decreasing trend with increasing speed. For the asphalt layer, the strain values showed an increasing trend with increasing temperature; for the base layer, the strain values showed a decreasing trend with increasing service time. The type of base layer had a significant effect on the strain value. Compared with the conventional base layer, the large-particle-size crushed stone base treated with fly ash and slag powder had lower strain at the base layer and a lower position of the asphalt layer, which could better prevent bottom-up fatigue cracking. Finally, the strain prediction model of the pavement under the speed and temperature (service time) was fitted to obtain a model that can predict the mechanical response of the pavement under different operating conditions. The findings of this research can provide a reference for the design of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder.

Investigation on Dynamic Response and Compaction Degree Characterization of Multi-Layer Asphalt Pavement under Vibration Rolling

Dynamic response of asphalt pavement under vibration rolling load: Theory and calibration

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Interlocking Evaluation of Mesoscopic Skeleton with the Compaction Degree of Hot-Mix Asphalt

Investigation of Particle Rotation Characteristics and Compaction Quality Control of Asphalt Pavement Using the Discrete Element Method

Optimizing Asphalt Surface Course Compaction: Insights from Aggregate Triaxial Acceleration Responses

Study on the Influencing Factors of Asphalt Mixture Compaction Quality Test Method Based on Simulation and Experimentation

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

A novel method for evaluating asphalt pavement structural performance based on vehicle vibration

Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects

Asphalt Pavement Compaction and Vehicle Speed Monitoring Using Intelligent Aggregate

Analysis on Mechanical Response of Asphalt Pavement Structure Based on 3 D Viscoelastic Finite Element Method

Numerical Simulation of Asphalt Compaction and Asphalt Performance

Asphalt Pavement Compaction Monitoring Based on Fiber Grating Sensing Technology

A spectral analysis of the dynamic frequency characteristics of asphalt pavement under live vehicle loading

Study on Compaction Properties and Skeleton Structural Characteristics of Porous Asphalt Mixture

Investigation of the Relationship between Permanent Deformation and Dynamic Modulus Performance for Bearing-Layer Asphalt Mixture.

Evaluation of Vibration Compaction Ability and Road-base Materials Compaction Performance

Field Measurement and Analysis on the Mechanical Response of Asphalt Pavement Using Large-Particle-Size Crushed Stone Base Treated with Fly Ash and Slag Powder

Experiment and Numerical Simulation of the Dynamic Response of Bridges under Vibratory Compaction of Bridge Deck Asphalt Pavement

Assessment of compaction quality of highway subgrade via roller-integrated positive maximum velocity detection technique