Abstract:This study assessed the impact of calcium silicate slag (CSS), an industrial by-product of aluminum extraction from fly ash, on the reaction kinetics, compressive strength, and efflorescence of one-part sodium carbonate-activated slag (SCS). Various proportions of CSS (0%, 10%, and 20%) were used to substitute for slag. The resulting performances were evaluated through chemical shrinkage, heat liberation, compressive strength, water absorption, phase composition (XRD and TG.), microstructures (BET and BSE-EDS), and simulated efflorescence test (partially and fully immersed in deionized water). The results indicate that the CSS possesses a porous structure. The addition of CSS impairs flowability but accelerates the development of chemical shrinkage and heat liberation. The incorporation of CSS promotes the transformation of gaylussite, leading to an increase in CASH and hydrotalcite formation. Consequently, a higher compressive strength and a lower water adsorption rate are achieved. 10% CSS addition improves the splitting tensile strength of SCS under conditions of partial immersion in the efflorescence test. However, a 20% CSS substitution exacerbates the formation of efflorescence products and reduces the splitting tensile strength. These observations are associated with residual alkalis in CSS, a lower Al/Si ratio of products, and an increase in capillary pores attributed to CSS particles. This paper demonstrates the feasibility of using alkaline solid waste for slag substitution and performance regulation in SCS and reveals the underlying mechanism. The prepared CSS-SCS binder exhibits much lower energy consumption and CO2 emission than traditional cement-based material, as determined by life cycle assessment.

Chloride Adsorption of Synthetic Individual Reaction Products in Alkali-Activated Fly Ash

Chloride binding behavior of synthesized reaction products in alkali-activated slag

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Chloride transport in alkali activated materials influenced by different reaction products: a review

Chloride Ions' Penetration of Fly Ash and Ground Granulated Blast Furnace Slags-Based Alkali-Activated Mortars

Chloride Resistance and Binding Capacity of Cementitious Materials Containing High Volumes of Fly Ash and Slag

Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars

Evaluation on Reactivity of Fly Ash from Different Sources in Alkali Activated System-Progressing Environmentally Construction Through Waste Utilization

Reaction mechanism of sulfate attack on alkali-activated slag/fly ash cements

Synthesis of Pure Na–X and Na–P Zeolite from Acid-Extracting Residues of CFB Fly Ash by a Single-Step Hydrothermal Method

The Study of Alkali-activated Fly Ash Fixing Capability of Chloride Ion and its Mechanism

Utilization of waste glass in alkali activated slag/fly ash blends: reaction process, microstructure, and chloride diffusion behavior

Chloride penetration and binding behavior in unsaturated alkali-activated slag mortars

A numerical study on chloride transport in alkali-activated fly ash/slag concretes

Study on ammonia removal by artificial zeolites synthesized from optimized coal fly ash

Efficient Activation of Coal Fly Ash for Silica and Alumina Leaches and the Dependence of Pb(II) Removal Capacity on the Crystallization Conditions of Al-MCM-41

Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence

Early activation of high volume fly ash by ternary activator and its activation mechanism

Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions