Abstract:The trade-off between strength and ductility remains a significant challenge for high-entropy alloys (HEAs). The layer-by-layer printing manner inherent in the laser powder bed fusion (L-PBF) leads to distinctive microstructures in alloys, in turn yielding unexpected performances that are promising for resolving this contradiction. At present, the influence of L-PBF technology on the microstructures and mechanical properties of near-eutectic HEAs has yet to be explored. In the present work, a metastable AlCo 0.4 CrFeNi 2.7 hypoeutectic HEA with an extraordinary strength-ductility combination was successfully fabricated using L-PBF. The precipitation behaviors and mechanical properties of the alloy were further modulated through annealing. The results reveal that the high cooling rates inherent in L-PBF promote the formation of a "pseudoeutectic" structure featuring the face-centered-cubic (FCC) + body-centered-cubic (BCC) dual-phase nanolamellae. Furthermore, after annealing at 600-750 °C, the L1 2 and B2 precipitates are generated in the FCC lamellae, accompanied by a coarsening of the original Cr-rich precipitates (BCC) in the BCC lamellae. The as-printed sample exhibits remarkable mechanical properties, posing a yield strength of 1007 MPa, an ultimate strength of 1249 MPa, and a total elongation of ∼25.1%. After annealing at 750 °C, the tensile yield strength and ultimate strength are further increased to 1201 MPa and 1512 MPa, respectively, while the elongation is maintained at ~15.1%. The analysis results demonstrate that the high strength originates from the hard BCC lamellae and nanolamellar interfaces, while the good ductility stems from the soft FCC lamellae and coordinated deformation of the dual-phase nanolamellae. Furthermore, the strength increase is further substantiated through the introduction of annealing-induced nanoprecipitates, thereby contributing to additional precipitation strengthening.

Fabrication of a Strong and Ductile Fecocrnimo0.3 High-Entropy Alloy with a Directionally Constrained Deformation Mechanism Via Laser Powder Bed Fusion

Fabrication of a strong and ductile FeCoCrNiMo0.3 high-entropy alloy with a micro-nano precipitate framework via laser powder bed fusion

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Superior Strength-Ductility Synergy in Additively Manufactured CoCrFeNi High-Entropy Alloys with Multi-Scale Hierarchical Microstructure

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Ultra Strong FCC Structured Ni8Cr4Co4Fe6W2 High Entropy Alloys with High Strength and Ductility by Laser Powder Bed Fusion

In-situ Alloyed CoCrFeMnNi High Entropy Alloy:Microstructural Development in Laser Powder Bed Fusion

New insight into tailorable eutectic high entropy alloys with remarkable strength–ductility synergy and ample shaping freedom fabricated using laser powder bed fusion

Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

A Novel Metastable FCC High Entropy Alloy with Excellent As-Cast Strength-Ductility Synergy by Utilizing Heterogeneous Structure and Twinning-Induced Plasticity

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Transformation-enhanced Strength and Ductility in a FeCoCrNiMn Dual Phase High-Entropy Alloy

Exceptional strength–ductility combination of CoCrFeMnNi high-entropy alloy with fully recrystallized structure by selective laser melting after post-deformation annealing

A novel Fe-rich Co-free high entropy alloys with low cost and excellent comprehensive mechanical properties

A novel complex-structure Co-free Cr-Fe-Ni-Al-Si-Ti-Cu high entropy alloy with outstanding mechanical properties in as-cast and cold-rolled states

L21-strengthened Face-Centered Cubic High-Entropy Alloy with High Strength and Ductility