Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Arm Voltage Balance Control of a Modular Multilevel Matrix Converter with Inner and Outer Loop Double Adjustment Based on Circulating Current

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Control of Modular Multilevel Converter Under Imbalance of AC Power System

A Control System for Large-Scale Modular Multilevel Converters.

Optimal Arm Current Reallocation of Modular Multilevel Matrix Converter Dedicated for Power Grid Interconnection

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Arm Voltage Balancing Control of Modular Multilevel Resonant Converter

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

An Optimal Full Frequency Control Strategy for the Modular Multilevel Matrix Converter Based on Predictive Control

A Branch Current Reallocation Based Energy Balancing Strategy for the Modular Multilevel Matrix Converter Operating Around Equal Frequency

A Rotation-Based Capacitor-Voltage-balancing Method for Modular Multilevel Converters

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

Arm Current Control Strategy for Mmc-Hvdc under Unbalanced Conditions

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

Control Strategy with A Generalized Dc Current Balancing Method for Multimodule Current-Source Converter

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

A Current Reallocation Strategy to Attenuate the Peak Arm Current of the Modular Multilevel Matrix Converter

Distributed Control for the Modular Multilevel Matrix Converter

A Capacitor Voltage Balancing Method for a Modular Multilevel DC Transformer for DC Distribution System

Research on Modeling and Control Strategy of Modular Multilevel Matrix Converter Supplying Passive Networks