Abstract:The effect of rolling temperature on the incomplete recrystallization behavior and the relationship to mechanical properties in 0.06C–4Mn-1.2Cr (wt.%) steel was investigated. Three plates of experimental steel were produced by hot rolling at different temperatures and intercritical annealing processes in this study. The microstructure of experimental steels was examined by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscope (TEM). The mechanical properties of test steel were examined by impact test and tensile test. Austenite reversion and cementite precipitation-dissolution was numerically simulated under the assumption of local equilibrium. With the decrease of hot rolling temperature from 1000 °C to 800 °C, the uniform equiaxed prior austenite grains microstructures changed to heterogeneous microstructures of laminated and ultrafine prior austenite grains arranged alternatively. The tensile and impact tests revealed that the medium manganese steels rolling at 800 °C had an excellent combination of mechanical properties. Elongation had a great relationship with retained austenite fraction and stability. The fractography of impact specimens was examined to explore the toughening mechanism of the micro-laminated steels. The steel with uniform equiaxed grain structure exhibited a relatively low tensile strength of 750 MPa and low elongation of ∼20% and an extremely poor low-temperature toughness of ∼40 J at −40 °C. An enhanced low-temperature toughness (∼233 J at −40 °C), as well as an improved tensile strength (823 MPa) and higher elongation of ∼40%, was obtained in the steel with heterogeneous microstructures. The content of austenite in heterogeneous microstructure is twice that in uniform equiaxed grain structure. And cementite dissolved more thoroughly in the heterogeneous microstructure. The high austenite content of heterogeneous microstructures enabled the steel to be significantly stronger and ductile, which contributed to the high tensile strength and elongation to some extent. It is concluded that the effect of interface decohesion resulted in the occurrence of delamination. And the high austenite content and delamination greatly improved the low-temperature toughness of experimental steel.

The Microstructure Evolution Law of Heavy Steel Plate for Low Temperature Pressure Vessel in Thermal Cycle Process and Effects on Mechanical Properties

Effect of simulated PWHT cycle times on microstructure and properties of A516Gr70 plate

Effects of Heat Treatment Process on Microstructure and Mechanical Properties for Extra-Thick High-Strength Steel Plate

Effect of Post-weld Heat Treatment on the Microstructure and Mechanical Properties of 2.25Cr-1Mo-0.25v Ultra-Thick Steel Plate

Experimental Study on Mechanical Properties and Fracture Toughness of Structural Thick Plate and Its Butt Weld along Thickness and at Low Temperatures

Microstructure Regulation and Mechanical Properties of Low-Carbon Multiphase Steels

Influence of Post-Weld Heat Treatment on Microstructure and Toughness Properties of 13MnNiMoR High Strength Low Alloy Steel Weld Joint

Effect of Initial Microstructure on Mechanical Properties of Pressure Vessel Steel after Intercritical Heat Treatment

Effect of Microstructure on Low-Temperature Fracture Toughness of a Submerged-Arc-Welded Low-Carbon and Low-Alloy Steel Plate

Effect of rolling temperature on microstructure and mechanical properties of medium manganese steel

Experimental Analysis of Mechanical Properties of Thick Plate in Steel Structure at Low Temperature

Crystallography of Transformation Products with Different Cooling Rates in Low-Carbon Alloy Steel and Its Effect on Low-Temperature Toughness Uniformity of Heavy Plates

Microstructure and Mechanical Properties of Nuclear Pressure Vessel Steel SA533B Heavy Plate

The impact of intercritical annealing temperature on microstructure and mechanical properties of an ultra-low carbon medium manganese heavy steel plates

Effect of Postweld Heat Treatment on Microstructure and Properties of Thick S11306 Ferritic Stainless Welded Joints

Study on Microstructure Evolution and Properties of SA738Gr.B Steel with Different Austenitizing Holding Time and Peak Temperature

Study of the impact properties and microstructure evolution in a high-strength low-alloy heavy steel

EFFECT OF FINISH COOLING TEMPERATURE ON MICROSTRUCTURE AND LOW TEMPERATURE TOUGHNESS OF Mn-SERIES ULTRA-LOW CARBON HIGH STRENGTH LOW ALLOYED STEEL

Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate

Influence of lamellarizing process on microstructure and properties of low carbon low alloy high-strength steel

Experimental Study on the Through-Thickness Properties of Structural Steel Thick Plate and Its Heat-Affected Zone at Low Temperatures