Abstract:The traditional experience-based design method is widely used for cast-steel joints, but it is now more and more difficult to meet the needs of engineering practice and the development of intelligent manufacturing era. To this end, a generative design method was used to study the reasonable configuration of a four-branch cast-steel joint in practical engineering. The generative design method and corresponding mathematical model was described in detail, and then several four-branch cast-steel joints are generated by using the generative design. The representative generation joint models were selected according to the evaluation indexes of mechanical properties and costs, and the mechanical properties of the representative generation joints were analyzed and compared with the initial design joint, topology-optimized joint and welded hollow sphere joint. To verify the manufacturability of the model, the scale model of representative generation joints was manufactured using 3D printing technology. The results show that the configuration of four-branch cast-steel joints generated by the generative design are diverse and innovative in the joint forms. Furthermore, the generative joint model has a lighter mass and better load-carrying performance than other types of joints: it can reduce the mass of the joint by 3.18%, the maximum equivalent stress by 24.78% and the maximum displacement by 37.36% compared with the initial design joint.

Research on generative intelligent design of four-branch cast-steel joint