Abstract:Abstract In nuclear power plants, power actuated pressure relief valves serve several purposes. They act as safety valves and open automatically in response to unusually high pressures in the primary system. They also act as power-operated valves and are used to relieve steam in response to automatic or manually initiated control signals. These valves are required to lift completely over a short duration from the time that they receive an actuation signal, or the system pressure exceeds the set point. This short lift time results in the valve disk moving at high velocities, and can result in high impact forces on the piston and stem when the valve fully opens. To quantitatively evaluate the dynamic performance of the Target Rock Pressure Relief Valve, an analysis effort was undertaken which would accommodate both the fluid dynamic features of the valve operation, as well as the kinematic characteristics of the valve, during pressure relief valve operation. To execute the analysis, the Generalized Fluid System Simulation Program (GFSSP) was used. GFSSP is a network flow solver computational fluid dynamics (CFD) code developed by NASA that has the ability to analyze transient, multiphase flows, and conjugate heat transfer, along with the inclusion of custom user subroutines developed by the user which can accommodate other simulation requirements. In this paper, we present the GFSSP model developed, and the computed results that could be compared with corresponding parameters as measured from experimental testing for the pressure relief valve. Adjustments to GFSSP input parameters allow the anchoring of the GFSSP valve model to test data. This makes it possible to use the GFSSP model as a predictive tool for understanding valve dynamics, as well as evaluating proposed pressure relief valve modifications for performance improvements.

Simulation Analysis for Valve Motion Characteristics of High Voltage Self Blast SF6 Circuit Breaker During No?load Opening Process

Simulation of auto-expansion high voltage SF6 circuit breaker breaking process considering valve motion

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Property Analysis of the High-pressure Pneumatic On-off Valve

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Analysis On The Velocity Characteristic Of Hydraulic Mechanism Based On Amesim

Simulation Of Controllable Pressure-Clearance Characteristic Of A High Pressure Pneumatic Chamber

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Characteristic Analysis of High Voltage Circuit Breaker with Hydraulic Operating Mechanism

Cushion Process of the Hydraulic Cylinder of Hydraulic Operating Mechanism for High Voltage Circuit Breaker

Dynamic Analysis of a High-Pressure Relief Valve During Opening

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Modeling and Dynamic Characteristics Analysis on a Three-Stage Fast-Response and Large-Flow Directional Valve

Dynamic fault analysis model development for vacuum circuit breaker action

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Simulation On Failure Analysis Of Vacuum Circuit Breaker Permanent Magnet Operating Mechanism Based On Three-Parameter Method

Research of simulation and experiment on arc characteristics of gas mechanical switch

Experimental and Numerical Analysis of Spring Stiffness on Flow and Valve Core Movement in Pilot Control Globe Valve