Numerical investigation of abrasive SC-CO 2 jet for horizontal well cavity completion in deep coal seams: Insights from a fluid-thermal-structural coupling model
Jianxiang Chen,Ruiyue Yang,Jiawen Li,Zhongwei Huang,Bo Zhang,Xiaozhou Qin
DOI: https://doi.org/10.1016/j.applthermaleng.2024.123457
IF: 6.4
2024-06-02
Applied Thermal Engineering
Abstract:Deep coal seams hold significant potential for coalbed methane (CBM) development and also offer advantageous formations for CO 2 geological storage (CGS). However, deep coal seams in China often face challenges of low permeability and high in-situ stress, rendering conventional reservoir stimulation methods less effective. To overcome these challenges, we proposed an innovative method for horizontal well cavity completion in deep coal seams by using the abrasive supercritical carbon dioxide (SC-CO 2 ) jet. The approach utilized the SC-CO 2 jet to create multiple cavities in horizontal wells within the coal seams. It is expected to achieve stress relief, enhance permeability, and enable CO 2 geological storage simultaneously. In this paper, we developed a fluid-thermal-structural coupling model to investigate the feasibility of abrasive SC-CO 2 jet. The influence of pressure drops, jet temperature and jet distance were investigated. The findings indicated that the performance of abrasive SC-CO 2 jets exceeded that of abrasive water jets in several key aspects, including jet velocity, impact strength, and abrasive erosion rate. However, the lower density and viscosity of SC-CO 2 resulted in a diminished particle-carrying capacity. Compared to the abrasive water jet, a lower sand ratio or lighter density particles are recommended, when applying SC-CO 2 in practice. Increasing jet pressure and temperature both contributed to improved rock breaking efficiency, yet through different mechanisms. An increase in jet pressure could provide more energy and enhanced the density and viscosity of SC-CO 2 , thereby boosting its particle-carrying capacity and improving the impingement effect. In comparison, the high temperature led to a reduction in both density and viscosity of SC-CO 2 . Although these changes in physical properties could increase jet velocity, it simultaneously diminished particle-carrying capacity, potentially increasing the risk of sand blockages during application. The flow field of swirling jet is accompanied by the high energy dissipation, impeding the formation of large-diameter cavities. In response, we proposed a design wherein swirling and conical nozzles were alternately arranged on the jetting tool. This scheme leveraged the distinct strengths of each nozzle type, aiming to enhance the efficiency of cavity construction using abrasive SC-CO 2 jets.
energy & fuels,engineering, mechanical,thermodynamics,mechanics