Abstract:The physicochemical properties of natural bentonite and its sorbents were studied. It has been established the modification of natural bentonites using polyhydroxoxides of iron (III) (mod.1_Fe_5-c) and aluminum (III) (mod.1_Al_5-c) by the "co-precipitation" method led to changes in their chemical composition, structure, and sorption properties. It was shown that modified sorbents based on natural bentonite are finely porous (nanostructured) objects with a predominance of pores of 1.5-8.0 nm in size. The modification of bentonite with iron (III) and aluminum compounds by the "co-precipitation" method also leads to an increase in the sorption capacity of the obtained sorbents with respect to bichromate and arsenate anions. A kinetic analysis showed that, at the initial stage, the sorption process was controlled by an external diffusion factor, that is, the diffusion of the sorbent from the solution to the liquid film on the surface of the sorbent. The sorption process then began to proceed in a mixed diffusion mode when it limited both the external diffusion factor and the intra-diffusion factor (diffusion of the sorbent to the active centers through the system of pores and capillaries). To clarify the contribution of the chemical stage to the rate of adsorption of bichromate and arsenate anions by the sorbents under study, kinetic curves were processed using equations of chemical kinetics (pseudo-first-order, pseudo-second-order, and Elovich models). It was found that the adsorption of the studied anions by the modified sorbents based on natural bentonite was best described by a pseudo-second-order kinetic model. The high value of the correlation coefficient for the Elovich model (R2 > 0.9) allows us to conclude that there are structural disorders in the porous system of the studied sorbents, and their surfaces can be considered heterogeneous. Considering that heterogeneous processes occur on the surface of the sorbent, it is natural that all surface properties (structure, chemical composition of the surface layer, etc.) play an important role in anion adsorption.

Adsorption Ability of Nitrogen-Containing Polymer Sorbents Based on Urea-Formaldehyde Resin and Aminoacetic Acid Towards Heavy Metal Ions

Preparation of Humic Acid-Bentonite Polymer Composite: A Heavy Metal Ion Adsorbent

Adsorption Properties of Fe_3O_4/Poly(acrylate-methyl-ester) Magnetic Microspheres for Metal Ions

Synthesis and characterization of amine functionalized silylated clay for heavy metal adsorption: Thermodynamic and kinetic studies on Fe(III) ion

Optimization and Adsorption Behavior of Nanostructured NiFe2O4/Poly AMPS Grafted Biopolymer

Adsorption of Bichromate and Arsenate Anions by a Sorbent Based on Bentonite Clay Modified with Polyhydroxocations of Iron and Aluminum by the "Co-Precipitation" Method

Preparation of Amino Functionalized Polymeric Resins for Selective Removal of Copper Ions

Ionized acrylamide-based copolymer / terpolymer hydrogels for recovery of positive and negative heavy metal ions

Polyacrylamide Hydrogel an Effective Adsorbent for the Removal of Heavy Metal from Aqueous Solution: Isotherm, Kinetic, and Thermodynamic Studies

Sorption of non‐ferrous metal ions from aqueous solutions by polymer compositions based on polyacrylic acid and bentonite clay

Со(ІІ) and Ni(II) Removal from Aqueous Solutions by Polymer and Polymer/Silica Adsorbents with Sulfo and Carboxyl groups

Preparation and Characterization of a Novel Amidoxime-Modified Polyacrylonitrile/Fly Ash Composite Adsorbent and Its Application to Metal Wastewater Treatment

Characterization and Performance Analysis of an Adsorptive Polyacrylonitrile based Hydrogel for Heavy Metals Removal

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

Preparation of Humic Acid-Bentonite-Polymer Composite and Investigation of Its Efficiency for the Removal of Nickel, Cadmium and Lead Ions from Wastewater

Rational Design of Polyamine-Based Cryogels for Metal Ion Sorption

The Adsorption of Heavy Metal Ions

Metal ion removal properties of crosslinked poly(acrylamide-co-2-acrylamide-2-methyl-1-propane sulfonic acid)

Dual magnetization and amination of cellulosic chains for the efficient adsorption of heavy metals

The Adsorption of Heavy Metal Ions by Poly (Amidoamine) Dendrimer-Functionalized Nanomaterials: A Review

Immobilization of 5-aminopyridine-2-tetrazole on cross-linked polystyrene for the preparation of a new adsorbent to remove heavy metal ions from aqueous solution