Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

Simulation Analysis of Second Order Time-Averaged Acoustic Streaming under Vibration Excitation

Thermoacoustic Model For Time-Averaged Flowing Streaming Within Parallel Plate And Cylindrical Tube Subjected To Oscillating Flow

Simulation of resonant acoustic mixing of liquid-solid-phase

Numerical simulation of microfluidic mixing by ultrasonic-induced acoustic streaming

Simulation Of The Flow Induced By Acoustic Streaming In Noncontact Ultrasonic Motors

Acoustic Streaming Near a Sharp Structure and Its Mixing Performance Characterization

Proper Orthogonal Decomposition Analysis and Dispersion Characteristics of Resonant Acoustic Flow

Experimental Study of Acoustic Streaming Induced by a Sharp Edge at Different Frequencies and Vibrating Amplitudes

Simulation and Analysis of the Cabin Typical Structure under Vibro-acoustic Combined Environment

A theoretical study of time-dependent, ultrasound-induced acoustic streaming in microchannels

EFFECT OF NON-UNIFORMITY OF SOURCE VIBRATION AMPLITUDE ON THE SOUND FIELD WAVE NUMBER, ATTENUATION COEFFICIENT AND REYNOLDS STRESS FOR THE ACOUSTIC STEAMING

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Numerical Simulation of Reverberant Acoustic Field Environment Test Based on Reciprocity Theorem

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Numerical simulation of free mixing layer with cross shear

Study of micro-scale flow characteristics under surface acoustic waves

Simulation and Experimental Investigation of Surface Acoustic Wave Streaming Velocity

Unsteady Time-Averaged Streaming in Microfluidics Using Traveling Surface Acoustic Waves

Experimental and Numerical Investigation of Acoustic Streaming Excited by Using a Surface Acoustic Wave Device on a 128° YX-LiNbO3substrate

Numerical simulation of microscale acoustic streaming flow

A Hydrodynamic/Acoustic Splitting Method with Fluid-Structure Feedback for Flow-induced Noise