Abstract:Novel energy generation technologies, such as high-permeability wind power and photovoltaic systems, exhibit inherent intermittency, randomness, and volatility. During periods of energy production from these sources, the impedance of the electrical grid frequently experiences significant fluctuations. Consequently, the grid manifests characteristics akin to a weak grid, highlighting the challenges associated with integrating renewable energy sources with variable output profiles. These fluctuations lead to a shift in resonance spikes of the LCL-type filter towards the lower frequency band, consequently impacting the stability of inverter grid connections. To mitigate this issue, the present study introduces a novel approach integrating the D-split method and a proportional–differential feedforward strategy. This combination aims to reshape the inverter's output impedance, ensuring its consistent stability even amidst significant fluctuations in grid impedance. In this research, the optimal controller parameters for systems operating under robust grid conditions are initially determined. This selection process involves the application of the D-split method, supported by graphical visualization. Additionally, the amplitude and phase angle margin tester is employed while considering the system bandwidth as a limiting constraint. Moreover, accounting for the influence of grid impedance, the D-split method is reapplied to ascertain the most suitable values for the proportional–differential feedforward parameters. This adjustment aims to enhance the adaptability of the grid-connected inverter specifically in scenarios characterized by a weak grid. The hardware-in-the-loop (HIL) simulation results demonstrate that despite the presence of harmonics within the grid and a short circuit impedance ratio (SCR) of 3, the inverter maintains grid stability and effectively suppresses harmonics. Moreover, the total harmonic distortion factor (THD) of the grid-connected current remains below 5%.

Analysis and Design of the Feedforward Strategy for Inverters in the Weak Grid with Sequence Impedance Model

Inverter Admittance Phase-Reshaping Strategy for Enhancing Its Robustness to Grid Impedance.

Robust Control for Single Phase Grid-connected Inverters

Control Strategy for Grid-Connected Inverter in Photovoltaic Power Generation System

Design of Grid-tied Inverters with the Functions of Reactive and Harmonic Compensation

Control strategies for the grid-connected inverter with LCL filter

Oscillation Suppression Strategy of Three-Phase Four-Wire Grid-Connected Inverter in Weak Power Grid

Robust Control Strategy for Grid-connected Inverters with LCL Filter

The Control Strategy for the Grid-Connected Inverter Through Impedance Reshaping in q -Axis and its Stability Analysis Under a Weak Grid

A Feedforward Control-Based Power Decoupling Strategy for Grid-Forming Grid-Connected Inverters

Control Strategy for Grid-Connected Solar Inverters

Designing Parameters to Reshape the Inverter Output Impedance Based on the D-Split Method under Weak Grid Conditions

Control Strategy of Non-Linear Discrete Time-Optimal Error Feedback in PV Grid-Connected Inverter

Modularized Control Strategy and Performance Analysis of DFIG System under Unbalanced and Harmonic Grid Voltage

Optimization Strategy and Stability Analysis of Grid-Connected Inverter Based on PLL Positive Sequence Grid Voltage Feedforward in Weak Grid

Impedance-based stability analysis of single-phase inverter connected to weak grid with voltage feed-forward control

Multi resonant Component-Based Grid-Voltage-Weighted Feedforward Scheme for Grid-Connected Inverter to Suppress the Injected Grid Current Harmonics Under Weak Grid

Robust Current Control of Grid-Tied Inverters for Renewable Energy Integration under Non-Ideal Grid Conditions

Stability Analysis of Grid-Forming Inverters with Voltage and Current Feedforward

A Series Impedance Reshaping Control Method Considering PLL Dynamics for Grid-Connected Inverters under Weak Grid Conditions