Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Mild Closed-Loop Process for Lithium–iron Separation and Cathode Materials Regeneration from Spent LiFePO4 Batteries

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

Integrated Recycling of Valuable Elements from Spent LiFePO4 Batteries: a Green Closed-Loop Process

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries

Study on the Selective Recovery of Metals from Lithium Iron Phosphate Cathode Materials Based on Hydrothermal Oxidation

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

A Green and Effective Room-Temperature Recycling Process of LiFePO4 Cathode Materials for Lithium-Ion Batteries.

Closed-loop regeneration of LiFePO4 from spent lithium-ion batteries: A “feed three birds with one scone” strategy toward advanced cathode materials

Endogenous Advanced Oxidation Process with Peracetic Acid for Recycling Spent LiFePO4 Batteries

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Selective Recovery of Lithium and Iron Phosphate/carbon from Spent Lithium Iron Phosphate Cathode Material by Anionic Membrane Slurry Electrolysis.

An Economical and Closed-Loop Hydrometallurgical Method to Prepare Battery-Grade Iron Phosphate from Delithiated LiFePO4 Cathode Scrap

All-Component Recycling and Reuse Process for Spent LiFePO4 Cathodes

Theoretical-molar Fe3+ Recovering Lithium from Spent LiFePO4 Batteries: an Acid-Free, Efficient, and Selective Process.

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

A Facile Recovery Process for Cathodes from Spent Lithium Iron Phosphate Batteries by Using Oxalic Acid

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Creative Method for Efficiently Leaching Ni, Co, Mn, and Li in a Mixture of LiFePO4 and LiMO2 Using Only Fe(III)

A facile recycling and regeneration process for spent LiFePO 4 batteries