Abstract:Prediction of micropollutant abatement during advanced oxidation processes by modelling can provide valuable information to optimize the process for efficient water treatment. In this study, a probe-based kinetic model was developed to simulate micropollutant abatement during water treatment by a cobalt-mediated peroxymonosulfate (Co(II)/PMS) process. Eight micropollutants (atrazine, primidone, sulfisoxazole, sulfamethoxypyridazine, gemfibrozil, chloramphenicol, p-chlorobenzoic acid, and perfluorooctanoic acid) were spiked in various water matrices (synthetic water and real surface water), which were then treated by the Co(II)/PMS process. By following the decay of PMS, atrazine, and primidone (as sulfate and hydroxyl radical (SO4 center dot- and (OH)-O-center dot) probes) during the process, the exposures of PMS, SO4 center dot- and (OH)-O-center dot were calculated using the model. Then, based on the determined exposures, the abatement efficiencies of the other micropollutants could be reasonably predicted with the model. The results indicate that by using a couple of probes to measure the SO4 center dot- and (OH)-O-center dot exposures, the model can be used for the generalized prediction of the abatement of various micropollutants during water treatment by the Co(II)/PMS process. In addition, modelling results show that for a given water matrix, the ratios of SO4 center dot- and (OH)-O-center dot concentrations to PMS concentrations (R-SP and R-HP) are almost constant during the Co(II)/PMS process. This finding allows the transient concentrations of SO4 center dot- and (OH)-O-center dot to be quantified based on the constant R-SP and R-HP ratios and the PMS concentrations observed during the process. The results of this study suggest that the probe-based kinetic models can provide a useful tool to characterize the persulfate-based process and to predict the abatement efficiencies of various micropollutants during water treatment.

Modeling of Pertinent Parameters Influence on the Time Dependent Mass Transfer Coefficient of Particulate Matter under the Sink Effect

Theoretical and Experimental Investigations of Time-Dependent Mass Transfer Mechanism of Fine Particulate Matter under the Sink Effect

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

A Numerical Model for Predicting Particle Collection Efficiency of Electrostatic Precipitators

Simulative Prediction of Ultrafine Particulate Matter Formation by Means of Different Pyrolysis Models

Operational Parameters Impact on Spatial and Temporal Distribution and Multifractal Characteristics of Particulate Matter Concentration under the Sink Effect

Characterization of Tandem Aerosol Classifiers for Selecting Particles: Implication for Eliminating the Multiple Charging Effect

Study of the Influence of Methanol/f-T Diesel Combustion Particle Materiality Parameters on the Deposition Process in Diesel Particulate Filter Trap Units

Numerical Simulation For Nucleated Vehicle Exhaust Particulate Matters Via The Temom/Les Method

A Mass Transfer Model to Predict the Performance of Tube-type Passive Samplers for Exposure Determination of Volatile Organic Compounds

Lumped model for evaluating dynamic filtration and pressure drop behaviour in diesel particulate filters

Industrial application and numerical simulation on discrete dynamics of fine particulate matters: Condensational growth, deposition and agglomeration

Numerical Modeling on Simultaneous Removal of Mercury and Particulate Matter Within an Electrostatic Precipitator

Modelling and Prediction of Fe/MWCNT Nanocomposites for Hexavalent Chromium Reduction

Modeling and prediction of loading characteristics of electret filter media for PM2.5

Simulating Micropollutant Abatement During Cobalt Mediated Peroxymonosulfate Process by Probe-Based Kinetic Models

Mass transfer of multi-pollutants over titania-based SCR catalyst: A molecular dynamics study

Response Surface Methodology and Artificial Neural Network Modeling for the Removal of Volatile Organic Compounds in Biotrickling Filters

Extended filtration model for diesel particulate filter based on diesel particulate matter morphology characteristics

A Pore-Scale Numerical Framework for Solute Transport and Dispersion in Porous Media