Abstract:Immiscible fluid–fluid displacement in porous media is an important phenomenon that impacts the field of underground energy and environmental engineering, such as enhanced oil/gas recovery, geological CO2 sequestration, and transport and remediation of groundwater pollutants. In enhanced oil recovery, the occurrence of the fingering instability of the two-phase flow interface causes a significant reduction in the oil recovery factor for waterflooding. In geological CO2 sequestration, the efficiency of CO2 capillary/residual trapping is limited by the noncompact displacement pattern, presenting only part of brine displaced by scCO2. Although extensive studies have investigated viscous and capillary fingering in porous media, how viscous and capillary forces affect the crossover is not well understood. Quantifying and characterizing the transition of immiscible fluid–fluid displacement patterns are therefore important. In this article, comprehensive investigation of capillary number and viscosity ratio effects on displacement patterns and efficiency was established by a series of displacement microfluidic experiments in a homogeneous pore network. Three pairs of nonwetting–wetting immiscible fluids with viscosity ratios M ranging from 1/1000 to 1000 were used to perform the displacement experiments. The drainage experiments of water displacing silicone oil were conducted under five flow rate conditions with capillary number log10 Ca ranging from −7.19 to −3.45, while the imbibition experiments of silicone oil displacing water displayed at four flow rates with log10 Ca varying from −7.25 to −2.52. The relationship between displacement efficiency S inv and fractal dimension D f as a function of M and Ca was established to quantitatively determine the transition of displacement patterns (capillary fingering, viscous fingering, stable displacement, and ordered dendritic). The results indicated that D f increased with S inv under unfavorable conditions (M < 1) and decreased as S inv for M > 1, and lower invading fluid saturations were observed in the crossover zone between capillary fingering and viscous fingering for M = 1/20 and 1/200. Based on the pore-scale analysis of pore-filling events and microscopic observation, the theoretical model of the transitions for invasion modes were proposed to determine the critical capillary corresponding to viscosity ratio and contact angle. This study extends the classic log10 M–log10 Ca phase diagram and quantifies the dynamic effects of capillary force and viscous force on the immiscible fluid–fluid displacement process.

Nondilute Effects Reshape Miscible Displacement in Porous Media

Dynamics of Fluid Displacement in Mixed-Wet Porous Media

Non-monotonic Wettability Effects on Displacement in Heterogeneous Porous Media

Pore-scale simulation of miscible displacement in an inclined porous medium

Wetting Dynamics of Spontaneous Imbibition in Porous Media: from Pore Scale to Darcy Scale

Effects of Pore Structures on Seepage and Dispersion Characteristics during CO 2 Miscible Displacements in Unconsolidated Cores

From mixing to displacement of miscible phases in porous media: The role of heterogeneity and inlet pressure

Nonlinear and non-local analytical solution for Darcy–Forchheimer flow through a deformable porous inclusion within a semi-infinite elastic medium

High-performance Displacement by Microgel-in-oil Suspension in Heterogeneous Porous Media: Microscale Visualization and Quantification.

Tuning capillary flow in porous media with hierarchical structures

Using 3D-printed fluidics to study the role of permeability heterogeneity on miscible density-driven convection in porous media

Numerical simulation of miscible multiphase flow and fluid–fluid interaction in deformable porous media

Inertial Effects during the Process of Supercritical CO2 Displacing Brine in a Sandstone: Lattice Boltzmann Simulations based on the Continuum‐surface‐force and Geometrical Wetting Models

Suppressing viscous fingering in structured porous media

Immiscible/Near-Miscible relative permeability for confined fluids at high-pressure and high-temperature for a fractal reservoir

Wettability stabilizes fluid invasion into porous media via nonlocal, cooperative pore filling

Wettability Effect on Displacement in Disordered Media under Preferential Flow Conditions

Pore-Scale Dynamics of Liquid CO2–Water Displacement in 2D Axisymmetric Porous Micromodels Under Strong Drainage and Weak Imbibition Conditions: High-Speed μPIV Measurements

Pore-Scale Displacement Experiments Using Microfluidic Device to Investigate Fingering Mechanisms Using Both CO2 and N2: Implications for EOR and CO2 Geo-Storage

Effects of Capillary and Viscous Forces on Two-Phase Fluid Displacement in the Microfluidic Model

Immiscible fluid displacement in porous media with spatially correlated particle sizes